Table of Contents
Advertisement
Quick Links
WARRANTY AND DISCLAIMER
DIGITAL
MANUFACTURES AGAINST DEFECTS IN MATERIALS AND WORKMANSHIP
FOR A PERIOD LIMITED TO 1 YEAR FROM THE DATE OF SHIPMENT,
PROVIDED THE PRODUCTS HAVE BEEN STORED, HANDLED, INSTALLED,
AND USED UNDER PROPER CONDITIONS.
The company's liability under this limited warranty shall extend only to the
repair or replacement of a defective product, at the company's option. DIGITAL DELAY
INC. disclaims all liability for any affirmation, promise, or representation with respect to
the products.
The customer agrees to hold DIGITAL DELAY INCORPORATED harmless
from, defend, and indemnify DIGITAL DELAY INC. against damages, claims, and
expenses arising out of subsequent sales of or use of DIGITAL DELAY INC. products, or
products containing components manufactured by DIGITAL DELAY INC. and based
upon personal injuries, deaths, property damage, lost profits, and other matters which
BUYER, its employees, or sub-contractors are or may be to any extent liable, including
without limitation, penalties imposed by the Consumer Product Safety Act (P.L. 92-573)
and liability imposed upon any person pursuant to the Magnuson-Moss Warranty Act (P.L.
93-637), as now in effect or as amended hereafter.
No warranties expressed or implied, are created with respect to the company's
products except those expressly contained herein.
disclaimers and limitations contained and relies on no other warranties or affirmations.
1020-scr
DELAY
INC.
2036 Fillmore Street
Davenport, Ia. 52804
www.racedigitaldelay.com
WARRANTS
THE
The customer acknowledges the
1
563-324-1046
PRODUCTS
IT
Advertisement
Table of Contents
Related Manuals for DIGITAL DELAY Crossover Plus SCR
Summary of Contents for DIGITAL DELAY Crossover Plus SCR
-
Page 1: Warranty And Disclaimer
The customer agrees to hold DIGITAL DELAY INCORPORATED harmless from, defend, and indemnify DIGITAL DELAY INC. against damages, claims, and expenses arising out of subsequent sales of or use of DIGITAL DELAY INC. products, or products containing components manufactured by DIGITAL DELAY INC. and based... -
Page 2: Table Of Contents
The Crossover Plus is the latest in a full line of electronic racing products from Digital Delay, Inc.. Designed to be more reliable and user friendly than any other multi- function delay box on the market. The Crossover Plus has a 12 digit keypad for fast and precise entry of information into the unit while a single illuminated multi-segment liquid crystal display is used to display all relative information. -
Page 3: Features, Applications, And Specifications
Features, Applications, and Specifications Features: • Discrete solid state I/O (input - output) construction • Microprocessor controlled timing with accuracy to 0.0001 of a second • Retains all numbers even when power is disconnected from the unit • Large display for easy reading of times •... -
Page 5: The Terminal Strip
The Terminal Strip +12VDC Terminal: Connect the +12VDC terminal to a switched +12 Volt source with enough amperage capable of driving the transbrake. (Using an in-line fuse just large enough to handle the current draw of the transbrake solenoid, normally 15 Amps., is recommended.) Transbrake Terminal: Connect the Transbrake terminal to the Transbrake solenoid. -
Page 6: The Display
The Display The display on the Crossover Plus is used to display all of the information that is stored in memory, as well as information entered on the keypad. There are eight red L.E.D.s to the left of the key pad. -
Page 7: Setting The Back-Light Intensity
Setting the Back-light Intensity To set the back-light Intensity press the 9 key on the keypad. The left most digit will show the current setting. To change the setting, press the * key on the keypad followed by the new setting (1-9). The smaller the number, the dimmer the back-light will be. -
Page 8: Setting Dial-Ins And Delay Times
Setting Dial-In and Delay Times To enter a new Dial-In or Delay Time, first press a numerical key (1-4) on the keypad to bring up the current stored time. Then press the * key on the keypad. The display will go blank indicating it is ready to accept a new time. Next use the numerical keys to enter the new four digit time into memory, leading zeros must be entered. -
Page 9: How Late
How Late To display the How Late information press the 5 key on the keypad. The right three digits display the How Late time. The left most digit will display an “8” if the transbrake released on Delay-2 (4-Digit). The left most digit will be blank if the transbrake released on Delay-1 (Crossover). For example if the number displayed is “8.012”...
Need help?
Do you have a question about the Crossover Plus SCR and is the answer not in the manual?
Questions and answers
im trying to hook up a Throttlestop and were should i hook the wires to thks