Matco Tools RL500 Operating Instructions

• Operating Instructions
• Warning Information
• Parts Breakdown
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those
dust masks that are specially designed to filter out microscopic particles.
Speed . . . . . . . . . . . . . 20,000 RPM
Cutting Depth . . . . . . . . . . . . . . 1"
Weight . . . . . . . . . . . . . . . 1.78 Lbs.
Length . . . . . . . . . . . . . . . . . 7-1/2"
SPECIFICATIONS
Wheel Size . . . . . 3" x 1/16" x 3/8"
Rec. Air Pressure . . 90 psig (6.2bar)
Avg. Air Consumption . . . . . 5 CFM
Air Inlet Size . . . . . . . . . . 1/4" NPT
1
ALWAYS READ
INSTRUCTIONS
BEFORE USING
POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
WEAR HEARING
PROTECTION
AVOID
PROLONGED
EXPOSURE TO
VIBRATION
RL500
3" Cut-Off Tool
RL500 05/28/03