MULTIQUIP DFG Series Manual page 27

appropriate weight to the handle for added
stability. Other means can also be utilized to
support the frame and provide proper machine
stability. Appropriate wheel chocks are also
recommended. FIGURE 25.
DANGER
EXERCISE EXTREME
WORKING NEAR OR UNDER THE SURFACE
GRINDER WITH THE
TILTED BACK IN THE SERVICE POSITION. IF
THE SURFACE GRINDER IS NOT POSITIONED IN
A STABLE CONFIGURATION, WITH ADEQUATE
COUNTERWEIGHT PROPERLY
UNEXPECTED MOVEMENT CAN ALLOW THE
SURFACE GRINDER TO FALL BACK TO THE
WORK SURFACE. THE
PROPERTY DAMAGE
INJURY.
FIGURE 25
3) Mount the multi-accessory attachment into the
slots provided in the multi-accessory discs. If the
attachment is directional in design, determine
that its mounting position in the disc allows for
proper operation.
4) Force a Mounting Wedge P/N 229019-017 into
the area between
attachment and the inside rib of the aluminum
disc by hand. The straight side of the mounting
wedge contacts the multi-accessory attachment.
The angled side of the mounting wedge contacts
the rib of the disc. FIGURE 26. An improper
mounting configuration is depicted in FIGURE
27.
DFG-SERIES SURFACE GRINDERS
ASSEMBLY INSTRUCTIONS/OPERATIONS
CAUTION WHEN
OPERATOR HANDLE
SECURED,
RESULT CAN BE
AND/OR PERSONAL
the multi-accessory
OPERATION AND PARTS MANUAL REV #4 (05/28/09)
FIGURE 26
FIGURE 27
DANGER
DO NOT OPERATE THE SURFACE GRINDER
WITH THE 229019-017 MOUNTING WEDGES IN
AN IMPROPER MOUNTING CONFIGURATION.
MOUNTING A WEDGE BETWEEN THE MULTI-
ACCESSORY ATTACHMENT AND THE OUTSIDE
RIB OF THE ALUMINUM DISC CAN ALLOW THE
WEDGE TO COME IN DIRECT CONTACT WITH A
VERTICAL WALL
OBSTRUCTION. SUCH OCCURRENCE CAN
RESULT IN LOSS OF MACHINE CONTROL,
PROPERTY DAMAGE
INJURY.
BEFORE OPERATING THE SURFACE GRINDER
WITH ANY MULTI-ACCESSORY ATTACHMENT,
DETERMINE THAT NO
ATTACHMENT AND/OR
EXTENDS BEYOND THE NORMAL PERIMETER
OF THE ALUMINUM DISC.
AND/OR FLOOR
AND/OR PERSONAL
PORTION OF THE
MOUNTING WEDGE
PAGE 27