Parts Breakdown - Matco Tools PTK3 Manual

PLEASE READ THE FOLLOWING
SAFETY AND OPERATIONAL
INFORMATION THROUGHOUT
BEFORE USING THIS ITEM.
CAUTION: INDUSTRIAL TORCH,
FOR INDUSTRIAL USE ONLY.
• Accessible parts may be very hot.
• Keep young children away from the appliance.
• Use only in well-ventilated area.
• Do not use the tool if it has damaged or worn seals.
• Do not use the tool if it is leaking,
damaged or which does not operate properly.
• Do not modify this tool.
CONNECT THE GAS CYLINDER TO THE TORCH
The torch is made with EN521(7/16") valve to connect
with standard 14-14.2 oz. propane gas bottles.
Thread the torch main body onto the gas cylinder,
lock the torch into the cylinder clockwise and make
sure it fixes well.
SAFETY SWITCH
DO NOT HOLD THE TORCH AND POINT THE
BURNER TOWARD YOURSELF!!
When the burner is not aimed toward yourself, push
the safety ON-OFF switch located below the trigger
to unlock the trigger, keep the safety switch pressed
down when igniting.
IGNITION AND CONTINUOUS FLAME
Turn the gas adjustment knob counterclockwise 2
rounds, try to ignite the torch by pushing the trigger.
If the torch is not ignited yet, try more rounds until it
is working.
For continuous flame, press the continuous flame
button on the side of the main body to keep the
flame working.
EXTINGUISH
To turn off, press the trigger one more time to turn
off the flame.
FLAME ADJUSTMENT
Turn the gas adjustment knob clockwise to reduce
the flame, or increase the flame in
counterclockwise rotation.
CAUTION: CONNECT THE CONTAINER IN A
WELL-VENTILATED PLACE. DO NOT SMOKE.
3 PIECE PROPANE TORCH
QUICK CHANGE KIT
Interchangeable
Tips Lock
2
3
Index #
1
2
3
4
Page 2
LAYOUT
Gas Adjustment
Knob
Trigger
Safety On-off Switch
Thread For Gas Cartridge

PARTS BREAKDOWN

4
Parts List
Part # Description
PTK301 Main Body
Blast Flame
PTK302
for brazing and large soldering
Pin-point Flame
PTK303
for precision/small soldering jobs
Large Soft Flame
PTK304
for shrinking and heating jobs
PTK3
Continuous
Flame Button
1
1810302-14