Table of Contents
Advertisement
2.1.4
M.2 installation
Supported M.2 type varies per motherboard.
•
•
•
1.
Loosen the screws from the M.2 heatsinks.
2.
Lift and remove the heatsinks.
3.
Install your M.2 to your M.2 slot. The steps may differ between installing M.2 of
different lengths, please refer to the different types and their installation steps below:
•
To install an M.2 to M.2_1 and M.2_2 slot
For 2280, 22110 length
A.
Follow step A only when you wish to install an 22110 length M.2 to M.2_1.
2-6
The illustrations only show the installation steps for a single M.2 slot, the steps are
the same for the other M.2 slots if you wish to install an M.2 to another M.2 slot.
Use a Phillips screwdriver when removing or installing the screws or screw stands
mentioned in this section.
The M.2 is purchased separately.
1
1
(optional) Remove the pre-installed removable M.2 Q-Latch screw at
the 2280 length screw hole.
2
1
2
1
Chapter 2: Basic Installation
Hide quick links:
Advertisement
Table of Contents
