Piping connection method:
Outdoor uint with single fan piping connection method
Outdoor uint with double fan piping connection method
Pipes can be connected in four directions
As shown in the figure, the piping can be connected from four
directions. Through the front / rear hole piping piping on the cover hole or crack directly across the floor.
From the outdoor machine unloading piping cover with a screwdriver and hammer knock off holes along the guide wire
break. Then, trim the edges of the holes, and mounted on the insulating sleeve (site) to protect the piping and wiring.
gas pipes
liquid pipes
A, B, C, D:Copper pipe hole
E:Power cord hole (with its own cable sheath)
F:Communication line hole
37
Enlarged diagram
gas pipes
liquid pipes
liquid pipes
gas pipes
Enlarged diagram
F
E
B
A
D
C