Storage; Storage Safety; Cleaning And Storage - Toro Z Master Professional 7000 Series Operator's Manual

Storage

Storage Safety

•
Shut off the engine, remove the key, wait for all
moving parts to stop, and allow the machine to
cool before storing it.
•
Do not store the machine or fuel near flames or
drain the fuel indoors.
•
Remove the key and store it in a safe place out
of the reach of children.

Cleaning and Storage

1. Disengage the blade-control switch (PTO),
engage the parking brake, turn the ignition key
to the O position, and remove the key.
FF
2. Remove grass clippings, dirt, and grime from the
external parts of the entire machine, especially
the engine and hydraulic system. Clean dirt and
chaff from the outside of the engine cylinder
head fins and blower housing.
Important:
You can wash the machine with
mild detergent and water. Do not pressure
wash the machine. Avoid excessive use
of water, especially near the control panel,
engine, hydraulic pumps, and motors.
3. Check the brake; refer to
(page 61).
Service the air cleaner; refer to
Cleaner (page 46).
Grease the machine; refer to
42).
4. Change the crankcase oil; refer to
Engine Oil (page
Check the tire pressure; refer to
Tire Pressure (page
Change the hydraulic filter; refer to
the Hydraulic Fluid and Filter (page
Charge the battery; refer to
(page 54).
Scrape any heavy buildup of grass and dirt
from the underside of the mower, then wash the
mower with a garden hose.
Note:
Run the machine with the blade-control
switch (PTO) engaged and the engine at high
idle for 2 to 5 minutes after washing.
5. Check the condition of the blades; refer to
Inspecting the Blades (page
Prepare the machine for storage when non-use
occurs over 30 days. Prepare the machine for
storage as follows:
Brake Maintenance
Servicing the Air
Lubrication (page
Servicing the
47).
Checking the
56).
Changing
68).
Charging the Battery
71).
A. Run the engine to distribute conditioned fuel
through the fuel system for 5 minutes.
B. Shut off the engine, allow it to cool, and
drain the fuel tank; refer to
Fuel Tank (page
Note:
Start the engine and run it until it
shuts off.
C. Dispose of fuel properly. Recycle as per
local codes.
Important:
stabilizer/conditioned fuel longer
than the duration recommended by the
fuel-stabilizer manufacturer.
6. Check and tighten all bolts, nuts, and screws.
Repair or replace any part that is damaged.
7. Paint all scratched or bare metal surfaces. Paint
is available from your Authorized Service Dealer.
8. Store the machine in a clean, dry garage or
storage area. Remove the key from the ignition
switch and keep it out of reach of children or
other unauthorized users. Cover the machine to
protect it and keep it clean.
79
Servicing the
52).
Do not store