Do you have a question about the IVAHG7POD and is the answer not in the manual?
Questions and answers
Barbara
March 7, 2025
Pump does not start and light will not turn after pressing any power button
1 comments:
Mr. Anderson
March 7, 2025
The Ivation IVAHG7POD pump may not start or light up after pressing the power button due to the following reasons:
1. Power Supply Issue – Ensure the power cord is properly plugged into a working outlet and that the outlet's voltage matches the unit's requirements. 2. Damaged Power Cord – If the power cord is damaged, it must be replaced by Ivation, an authorized serviceperson, or a qualified professional. 3. Unit Not Properly Turned On – Ensure the unit is turned off before connecting it to a power source, then press and hold the power button as required. 4. Electrical Malfunction – If the unit still does not start, it may require professional servicing, as it has no user-serviceable parts.
If none of these steps resolve the issue, contact Ivation customer support.
Thank you for purchasing the Ivation® 7-Pod Indoor Herb Garden Kit. This User Guide is intended to provide you with guidelines to ensure that operation of this product is safe and does not pose risk to the user. Any use that does not conform to the guidelines described in this User Guide may void the limited warranty.
• If for some reason the power cord becomes damaged, it must be replaced by either Ivation®, an authorized serviceperson, or a similarly qualified professional as soon as possible. Do not attempt to repair or replace the power cord on your own.
Page 4
PACKAGE CONTENTS 7-pod garden grower 14 x sponges Power adapter Nutrient A powder Water tank plug Nutrient B powder 14 x planting baskets User guide SETUP INSTRUCTIONS SETTING UP THE GARDEN GROWER 1. Take the garden grower out of its packaging.
Page 5
PLANTING INSTRUCTIONS PREPARING NUTRIENT SOLUTION 1. Pour 100 ml of fresh, clean water into the bottle of nutrient A powder. Next, mix and stir the powder and liquid in the bottle. Then, pour another 100 ml of water into the bottle of nutrient B powder and stir the contents in the bottle.
Page 6
PREPARING GARDEN GROWER 1. Remove the water tank plug located on the water tank cover. 2. Pour the liter of prepared A/B nutrient solution into the water tank. For the beginning of the planting process, it is recommended to add water slightly above the MAX indicator located under the water tank plug.
Page 7
and your results may vary. If this happens, remove the seed(s) and replace them with new ones. 5. Allow your seeds time to grow. After 24 hours, the seeds should begin to show signs of sprouting. Even if they do not, please allow the growing process to continue.
NOTE: The grower will make a beep sound when you press a button for a different mode. NOTES CONCERNING INTERNAL GROWER CLOCK The garden grower features an internal clock that begins a Lights On/Lights Off cycle once the machine is connected to power. The timing may vary slightly.
plugged in properly. Unplug the machine and reconnect it or check power supply making sure it has efficient power. • When maintaining your grower, keep in mind that lifting the water tank cover to a certain height will turn off the lighting panel.
Page 10
Where is the best location to place my 7-Pod Indoor Herb Garden Kit? Do the plants require any additional natural sunlight? Your Ivation® 7-Pod Indoor Herb Garden Kit only requires a FAQS...
Page 11
power connection to operate. However, in order to more easily facilitate the transportation of water to and from the kit, it can be advantageous to place the kit in a room with easy access to a sink or other source of water. You can place the kit in your bedroom, in your kitchen, or even in a basement, as the ideal growth conditions for your plants are facilitated by the kit’s systems.
Page 12
the max height of the lighting panel) can’t be cultivated in the grower. How often does the water in the tank need to be changed? The water in the tank does not need to be replaced. We have designed a water circulation system in the tank to ensure that the water in your tank will not deteriorate or spoil.
Page 13
machine and clean the tank and water tank cover. The baskets are reusable and can be set up once again after cleaning. The sponges in the baskets are made from disposable material so it is recommended that new sponges are purchased for new planting. Does the garden grower use a lot of power? The lighting of the grower is adjusted to the maximum to ensure that the plants can get enough light.
Problems Causes Solutions LED light is not working. The power is not running to Unplug, then reconnect the power the garden grower properly. adapter. The garden grower will make a beep sound indicating that it is ready for operation. The garden grower was not Once the machine is plugged in, be sure turned on.
It does not extend to any subsequent owner or other transferee of the product. WHAT DOES THIS WARRANTY COVER? This limited warranty covers defects in materials and workmanship of the Ivation® 7-Pod Indoor Herb Garden Kit (the “product”) for the Warranty Period as defined below.
1-866-849-3049 IVATION is a trademark of C&A IP Holdings, LLC, in the U.S, Canada, and the E.U. All other products, brand names, company names, and logos are trademarks of their respective owners, used merely to identify their respective products, and are not meant to connote any sponsorship, endorsement or approval.
Need help?
Do you have a question about the IVAHG7POD and is the answer not in the manual?
Questions and answers
Pump does not start and light will not turn after pressing any power button
The Ivation IVAHG7POD pump may not start or light up after pressing the power button due to the following reasons:
1. Power Supply Issue – Ensure the power cord is properly plugged into a working outlet and that the outlet's voltage matches the unit's requirements.
2. Damaged Power Cord – If the power cord is damaged, it must be replaced by Ivation, an authorized serviceperson, or a qualified professional.
3. Unit Not Properly Turned On – Ensure the unit is turned off before connecting it to a power source, then press and hold the power button as required.
4. Electrical Malfunction – If the unit still does not start, it may require professional servicing, as it has no user-serviceable parts.
If none of these steps resolve the issue, contact Ivation customer support.
This answer is automatically generated