Filling With Water; Refilling Water During Use - Bissell Steam Shot 39N7 Series Important Safety Instructions Manual

Filling with Water

Important: Your handheld steam cleaner features a water tank with a boiler system to create
powerful, pressurized steam for cleaning and sanitizing.* To properly heat up and build pressure, the
water tank MUST NOT BE OVERFILLLED. DO NOT FILL WITH MORE THAN 300 ml or 10 oz.
If overfilled, water replaces the air space in the tank required to heat up and build pressure. If this
happens, you will experience the following: 1. Hot water will leak out of the vents on the safety cap.
2. When the stream trigger is pressed, a stream of water will release out of the steam nozzle. 3. Once
the water is cleared, it will change to a spitting and sputtering steam/water mixture.
After the above steps have cycled through, proper steam will start to release out of the steam nozzle
for optimal steam cleaning.
Note: Use of distilled water
Do not use chemicals in the water tank of your machine.
steamer.
machine and void the warranty.
1.
Push down on the safety
cap while turning counter
clockwise.

Refilling Water During Use

Important: Your handheld steam cleaner features a water tank with a boiler system to create
powerful, pressurized steam for cleaning and sanitizing.* For safety, the water tank MUST be
depressurized before opening the safety cap to refill with water during use.
1.
Unplug your steam cleaner
and wait 5 minutes.
*Use as instructed. Results may vary. Tested under controlled laboratory conditions with accessory nozzle only.
WARNING
damage it or make it unsafe for use.
6 BISSELL.com
in place of tap water is recommended to prolong the life of your
DISTILLED
WATER
2.
Slowly pour 300 mL or
10 oz of water into steamer.
Do not overfill.
2.
After 5 minutes, press the
stream trigger to
built up pressure in the water
tank. When steam is no longer
present, all pressure has been
released and the water tank is
depressurized.
Never put descaling, alcoholic, vinegar, or detergent products into the steam cleaner, as this may
Other solutions may harm the
3.
Reattach the safety cap by
pushing down while turning
clockwise until the cap is
tightly secured. If cap is not
tightly secured, steam will leak
out of vents on cap.
3.
If safety cap is still hot,
release all use an oven mitt to remove.
Follow steps 1 to 3 above to
refill your tank.
cap is tightly secured before
plugging back in.
Be sure safety