Advertisement
Available languages
Available languages
USER GUIDE 659931
Congratulations and thank you for purchasing this Schwaiger product.
These operating instructions are intended to assist you in using the product.
Read through the instructions for use carefully. Store this guide safely through-
out the product's entire service life and pass it on to any subsequent users or
owners. Check that the supplied package is complete and ensure that none of
the parts are defective or damaged.
1. PACKAGE CONTENTS:
• LED Monitor Lamp
• Type C cable
• Instruction Manual
2. INTENDED USE:
This LED monitor lamp can be mounted on a stationary flat screen as well as
on a laptop. The lamp can be connected to a suitable 5 V power source with
the supplied Type C cable. The energy-saving light is dimmable and has a light
control with integrated touch sensor.
3. GENERAL SAFETY AND
WARNING INSTRUCTIONS
WARNING!
• This product is intended for private, non-commercial household use.
• This electronic product should not be left in the hands of children! Therefore,
keep it out of reach of children.
• Do not drop the product or expose it to strong shocks.
• Do not introduce any objects into the product's connections or openings.
• Do not disassemble the product into its individual parts. The unit does not
contain any user serviceable parts. Improper handling can lead to electric
shock and malfunction.
• Protect the product from moisture, water, rain, snow or drizzle and use the
product only in dry environments.
• Never try to replace the LEDs, as they are an integral part of the product.
• Clean this product only using a lint-free, ever so slightly damp soft cloth only
and do not use any aggressive cleaning agents. During cleaning, take special
care that no water/liquid/moisture gets into the product.
• To avoid overheating, ensure that the product is not covered with objects
made of metal, fabric, or other materials.
• Do not expose the product to intensive sunlight or heat. Ambient temperature
should not fall below -5 °C or exceed +35 °C.
WARNING
Never look directly into the light beam (especially from a short distance).
WARNING!
Do not turn on the lamp when the product is directed at a combustible surface.
The illuminated surface may overheat or ignite.
WARNING!
This light is not suitable as conventional household lighting.
659931
Schwaiger GmbH | Würzburger Straße 17 | 90579 Langenzenn | Hotline: +49 (0) 9101 702-299 | www.schwaiger.de | info@schwaiger.de
Features and specifications are subject to change without prior notice.
4. INITIAL OPERATION:
1. Plug the Type C cable into the Type C socket provided, on the back of the
LED monitor lamp. Connect the cable to a suitable 5 V power source, such
as a computer, laptop or charging adapter.
2. Attach the lamp by opening the clip, placing the front edge of the light flush
against your flat screen and closing the clip again.
3. Align the light by moving the hinge up or down.
4. Touch the on/off switch on the touch sensor to switch on the light.
5. FUNCTIONS AND KEY ASSIGNMENT:
1.
Switching on/off
2. -/+ Adjusting the brightness
3.
Light modes (natural/cold white/warm white)
All functions can be controlled by the integrated touch sensor.
6. TROUBLESHOOTING:
In case of problems, please observe the following instructions:
1. The lamp requires a connection to a properly powered USB port.
2. Remove the USB plug from the port and clean it carefully if necessary.
3. Make sure that the cable is connected to a power source and to the lamp at
the same time.
4. Make sure that the lamp is not damaged.
7. TECHNICAL DATA:
Model
659931
Connection type
1x Type-C socket
Cable length
1.5 m
Power supply
Input: 5V
Number of LEDs
66
Kelvin
3000/4000/5000 k
Lumen
150 lm
Illuminance
>500 lux
Dimensions (width)
460 mm
Dimensions (height)
53 mm
Dimensions (depth)
105 mm
8. MAINTENANCE & CLEANING:
NOTE
Danger of short-circuit!
Any water or other liquids which penetrate the casing may cause a short circuit.
Never immerse the product in water or other liquids.
Ensure that no water or other liquids penetrate the product.
NOTE
Risk of damage!
Handling the product improperly can lead to damage to the product.
Do not use any aggressive cleaning agents, brushes with metal or nylon bristles
or any sharp or metal cleaning objects such as a knife, hard scraper and similar,
since these may damage the surfaces.
1. Disconnect the product before cleaning.
2. Clean the product with a soft, dry cloth.
3. Use a slightly dampened cloth and, where necessary, a little mild
dish-washing detergent to clean stubborn stains.
4. Then let the product dry completely.
STORAGE
All parts must be completely dry before storing.
Always store the product in a dry place.
Store the product out of children's reach in a securely locked place and at a
storage temperature between 5 °C and 20 °C (room temperature).
DISPOSAL
Disposing of packaging
Sort before disposing of the packaging. Dispose of card and cardboard
in the used paper container and film in the corresponding recycling
container.
Disposing of product
(Applicable in the European Union and other European states with systems for
separated collection of materials)
Do not dispose of old electrical devices in the household
1 A, output: 4.5W
waste.
If the product can no longer be used, every consumer is legally obliged to
dispose of old electrical appliances separately from household waste, e.g.
at a collection point in his municipality/urban district. This guarantees that
old devices are recycled and a negative impact on the environment is
avoided. That is why electrical devices are marked with the symbol shown here.
Disclaimer
Schwaiger GmbH does not accept any liability or warranty for damages that are
sustained due to improper installation or mounting, improper use of the product
or non-compliance with the safety instructions.
Manufacturer's information
Dear Customer, please contact our Technical Support if you need technical
advice and your retailer is unable to help you.
Office Hours
(Technical Support in German)
Monday to Friday: 8:00 a.m. - 5:00 p.m.
BDA_659931
Advertisement
