Behringer MICROPOWER PS400 Manual page 3

4
MICROPOWER PS400
Important Safety
Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two blades
and a third grounding prong. The wide blade or the third prong are provided for your safety.
If the provided plug does not fit into your outlet, consult an electrician for replacement of
the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
MICROPOWER PS400
Bienvenido a Behringer
Gracias por mostrar su confianza en nosotros al comprar el Behringer
MICROPOWER PS400. Utilice esta fuente de alimentación fantasma
ultracompacta con mezcladores y preamplificadores de micrófono que
no incluyen fuentes de alimentación fantasma. El PS400:
• •
suministra alimentación fantasma (+12 V o +48 V) a cualquier
tipo de micrófono de condensador
• •
enruta la señal del micrófono a un mezclador o un
preamplificador de micrófono
◊ ◊
Lea las instrucciones de seguridad que aparecen al final
de este documento.
Conectores y elementos de control
Esta sección ilustra y describe cada conector PS400 y elemento de
control.
(1) (3)
(2)
Fig.1: Conectores y elementos de control PS400
(4) (5)