Lx Product Family; Lx Product Family Specifications - LogLogic MX Series Quick Start Manual

LX Product Family

LX Product Family
The LX product family includes the following Appliances:

LX Product Family Specifications

Hardware LX 510
Specifications
CPU Single Core
Pentium 4
Memory 512 MB
Hard Drive 250 GB
RAID No
‡
AC Power Connections 1
AC Input 100-240 V
50-60 Hz
Power Consumption 85 Watts
Heat Dissipation 290 BTU/hr
AC Current 1.0 A @ 120V
Operating Altitude -50 to 10,000 ft
-16 to 3048 m
Operating Temperature 10-35 degrees C. (Derate maximum temperature by 1 degree C per 300 meters above sea level for
Models 510, 1010, and 2010)
Relative Humidity 20-80% non-condensing
19" Rack Mount Chassis 1U
Chassis Mounting Front panel attaches to rack or
cabinet
Chassis (W x H x D) 17.25 x 1.75 x19 inches (43.82 x 4.45 x 48.26 cm) - LX 510, LX 1010
17.5 x 1.75 x 21 inches (44.50 x 4.45 x 53.30 cm) - LX 820
17.25 x 1.75 x 27 inches (43.82 x 4.45 x 68.58 cm) - LX 1020
Weight 18 lb / 8.16 kg
Ethernet 1x10/100(Eth0)
1x10/100/1000
Bonding Port Labeling Eth0 & Eth1
Console Connector 9-pin D-sub
(male) (null modem
cable provided)
*
Note: Performance of the LX 510 is limited, as this product is intended for small volume deployments.
2U Appliance RAID includes a cache memory with internal battery backup. In the event of an unplanned power outage, the
‡
battery will protect the integrity of the disk data for a maximum of 72 hours.
16
All manuals and user guides at all-guides.com
LX 510

LX 820

LX 1010

LX 1020

LX 2010

LX 4020

*
LX 1010
Single Core
Pentium 4
1 GB
250 GB
No
1
100-240 V
50-60 Hz
85 Watts
290 BTU/hr
1.0 A @ 120V
-50 to 10,000 ft
-16 to 3048 m
1U
18 lb / 8.16 kg
1x10/100(Eth0)
1x10/100/1000
Eth0 & Eth1
9-pin D-sub
LX 820 LX 1020
Quad Core Quad Core
Xeon Xeon
4 GB 6 GB
2x500 GB 2x1TB
RAID 1 RAID 1
1 2 (for
redundancy)
100-240 V 100-240 V
50-60 Hz 50-60 Hz
120 Watts 160 Watts
410 BTU/hr 550 BTU/hr
1.15 A @ 120V 1.35 A @ 120V
-50 to 10,000 ft -50 to 10,000 ft
-16 to 3048 m -16 to 3048 m
1U 1U
Rail kit provided.
Rails adjust 28" to 31" and attach to front and rear of rack or cabinet.
Caution:
Rails cannot be properly mounted if adjusted to under 28".
22 lb / 10.00 kg 28 lb / 12.73 kg 52 lb / 23.64 kg
3x10/100/1000 6x10/100/1000 1x10/100 (Eth0)
Eth0 & Eth1 Eth2 & Eth3;
Eth4 & Eth5
9-pin D-sub 9-pin D-sub
LX 2010 LX 4020
Dual Single Core Dual Quad Core
Opteron Xeon
4 GB 12 GB
8x250 GB 8TB
RAID 10 RAID 10
2 (for 2 (for
redundancy) redundancy)
100-240 V 100-240 V
50-60 Hz 50-60 Hz
300 Watts 440 Watts
1025 BTU/hr 1500 BTU/hr
2.5A @ 120V 3.3A @ 120V
-50 to 10,000 ft -50 to 10,000 ft
-16 to 3048 m -16 to 3048 m
2U 2U
17.5 x 3.5 x 28 inches
(44.45 x 8.89 x 71.12 cm)
52 lb / 23.64 kg
6x10/100/1000
2x10/100/1000
Eth1 & Eth2 Eth2 & Eth3;
Eth4 & Eth5
9-pin D-sub 9-pin D-sub
Quick Start Guide