Advertisement
C
(
ONTROLLER
VFD
The system is operated by a Grundfos Redi-Flo
Variable Frequency Drive controller. The controller
converts an input power source (single phase 115-
230V) to an output of three-phase 230V. The
controller is enclosed in a durable carrying case and
includes a 6 ft. power cord and a receptacle for
connection to the underwater pump.
The system incorporates several fault protection
devices and indicators which are displayed on the
controller front panel. These include: over temperature, under voltage, over voltage,
motor overload, variable frequency drive overload, ground fault, over current, and many
more features.
From the front panel of the controller, the operator can adjust the flow rate of the pump
from 0 GPM flow to a maximum of 50 GPM.
CAUTION: EVERY EFFORT SHOULD BE MADE TO ENSURE THAT THE
CONTROLLER IS KEPT CLEAN AND DRY.
P
& M
A
UMP
OTOR
The Grundfos Redi-Flo™ is a reliable variable
frequency drive motor coupled to a Grundfos
Submersible pump to produce up to a 50 GPM flow
rate. Using a 100 ft. waterproof cable with Sea-Con
connector, the 230V three-phase motor/pump creates a
suction effect to accomplish your underwater
vacuuming task. Any material less than 1/2" diameter
can easily be captured with this system. The Pump and
Motor Assembly comes complete as a quick-change
replaceable unit. Paired with the MLEP J-Lock Pole
System this unit can be changed out remotely
underwater without having to remove the entire
System.
CAUTION:
THE PUMP AND MOTOR ASSEMBLY
SHALL NEVER BE OPERATED WHEN NOT
INSTALLED IN ITS MOTOR HOUSING.
THE PUMP AND MOTOR ASSEMBLY SHALL NEVER BE OPERATED
WITHOUT A FILTER INSTALLED IN THE SYSTEM
Mini-Vac Assembly Instructions & Users Manual
)
SSEMBLY
TM
3
Advertisement
