Saving Settings In A Memory Channel - Icom IC-706MKII Programming Manual
Memory channel programming
Hide thumbs
Also See for IC-706MKII:
- Service manual (83 pages) ,
- Instruction manual (65 pages) ,
- Manual (30 pages)
Table of Contents
Advertisement
17. To activate the tone settings, press MENU to select M4. Press F3 until a "T" appears on the display.
Saving Settings in a Memory Channel
1. Press MENU to scroll through the menu. Select M2.
2. Rotate the M-CH dial to select a memory channel. (A [blank] indicates that the channel is open.)
3. Note: Choosing a pre-programmed channel (not blank) will cause you to overwrite that channel with the
new memory channel information.
4. Press and hold F-1 (MW) for 1-2 seconds to store the memory location.
5. To continue creating memory channels, return to step 1 of Entering Frequency, Offset, and Tone. If the
offset remains the same, return to step 2. If you have finished programming memory channels, Press the
F-3 key in the M2 menu. MEMO will appear on the display when in memory mode.
Knowledge Base |
©2019 Icom America Inc. The Icom logo is a registered trademark of Icom Inc.
2
Advertisement
Table of Contents
Need help?
Do you have a question about the IC-706MKII and is the answer not in the manual?
Questions and answers