Download Print this page
Naos QUASAR Assembly Instructions Manual
Hide thumbs Also See for QUASAR:

Advertisement

Quick Links

QUASAR
design D. D'URBINO P.LOMAZZI Xoll. CASTATI
ASSEMBLY INSTRUCTIONS
_____________________________________________________________________________________________
SPECIAL INSTRUCTIONS AND MAINTENANCE
Instructions and warnings for safe use.
Before operating the mechanism, read this manual carefully, especially the safety instructions which must be strictly followed.
Please refer constantly to this booklet during the lifetime of the product. If you find any part of the instruction unclear or have
any doubts regarding the mechanism, please contact BUYING.
SAFETY WARNING
WARNING!
Before any mechanism is activated. The operator must ensure that nothing can hinder the extension movement. He/She is
responsible for any damage caused to property, objects or people.
The opening and closing of the table must be preformed under strict supervision of the operator who must ensure that no
people, children or animals are nearby.
Minors over 12 years of age, people with reduced physical, sensory or mental capabilities or inexperienced operators can
use the mechanism of this table ONLY if previously instructed about safety and made aware of the potential hazards
associated with this table.
Children must NOT play with the table.
Cleaning and Maintenance operation cannot be carried out by anyone not properly instructed on use and maintenance
methods of the product as described in this manual.
The operator must comply with the following recommendations prior to activating any function of the table.
o
Make sure that there are no persons or animals at a distance less than one meter from the table.
o
Make sure that no persons or animals touch the table or any part of the table.
o
Make sure that no persons are sitting in proximity of the table.
o
Read and follow carefully the assemble, use and maintenance instructions and proceed as described.
WARNING!
The table is placed under the supervision of the operator being he/she solely responsible for the activation.
The Operator is fully responsible for eventual damages to persons and property, for the use of the table and for
complying with the instructions
NAOS SRL does not accent any liability for damages to persons, animals or property
pg. 1

Advertisement

loading

Summary of Contents for Naos QUASAR

  • Page 1 The Operator is fully responsible for eventual damages to persons and property, for the use of the table and for complying with the instructions NAOS SRL does not accent any liability for damages to persons, animals or property pg. 1...
  • Page 2 QUASAR design D. D’URBINO P.LOMAZZI Xoll. CASTATI ASSEMBLY INSTRUCTIONS The Table QUASAR will be delivered in 6 packages: 1 central glass, 2 leaves, 2 legs and 1 mechanism which will include hardware for assembly _____________________________________________________________________________________________ Warning! During assembling operations open and close the dining table only by using the special provided handle ...
  • Page 3 ASSEMBLY  Tighten the legs to the frame with screws C  Do NOT put any adjustable screws in the 4 holes indicated by the yellow arrows (below left).  The central top should be aligned as shown by the red arrow (below right). ...
  • Page 4 _________________________________________________________________________________________________________ Warning! Position the central top so that the markers X indicated in the hole of the brass metal plate and in the short pivot are aligned/facing the same side.  Springs are installed within the mechanism prior to shipping from factory ...
  • Page 5  Attach leaves aligning them as shown in FIG. IX without fully tightening the screws B  “a” side edge of leaves have preinstalled bumpers ADJUSTMENT – to align  When the dining table is opened;  With light pressure (as shown in FIG. XI) gently move the handle so that the leaves move toward the central top ...
  • Page 6  If adjustment of central top and leaves are needed refer to images below.  When the dining table is open and leaves are aligned with the central top  Align the 3 glasses together  Keep them aligned by holding with the aid of the handle pg.
  • Page 7  While one person is keeping the glass tops together and aligned; Tighten the screws under the table Tighten the 2 screws under both the leaves ADJUSTMENT – To horizontally level leaves with central top  Loosen the 2 screws that are under leaves (red arrow above) ...