Advertisement
CONTENTS
This product is supplied bagged and contains:
1
x
Floating Colour Change Switch
1
x
Battery charger
Please note: this product requires, but does not include, a Wi Fi or everysense
provision for its colours to change – see Specification below for a list of compatible products
BEFORE USE
1. Charge the battery – see Care & Maintenance below.
2. Make sure the rubber cap covering the charging connector is properly closed.
USE
1. Turn ON the main switch.
2. This switch is wireless – it works from a distance and does not require direct connection to
the switch-activated product. Make sure that the product to be activated is plugged in, and
FLOATING COLOUR CHANGE SWITCH 19424
FLOATING COLOUR CHANGE SWITCH 19424, KH 8.10
Copyright ROMPA® Ltd
product with
®
Advertisement
Table of Contents
Related Manuals for Rompa 19424
Summary of Contents for Rompa 19424
- Page 1 2. This switch is wireless – it works from a distance and does not require direct connection to the switch-activated product. Make sure that the product to be activated is plugged in, and FLOATING COLOUR CHANGE SWITCH 19424, KH 8.10...
- Page 2 In the unlikely event that your switch-activated product does not work with this switch, check: • That this switch is ON • That the battery is charged • That your switch-activated device is plugged in and set to ON if it has an ON/OFF button FLOATING COLOUR CHANGE SWITCH 19424, KH 8.10...
- Page 3 Interactive Fibre Optic ‘Fountain’ Panel by ROMPA 18537 Colour Wall Controller 19005 Snow Panel 20132 For further information about any of the above products please see www.rompa.com This product meets the requirements of EN60950 FLOATING COLOUR CHANGE SWITCH 19424, KH 8.10...
Need help?
Do you have a question about the 19424 and is the answer not in the manual?
Questions and answers