When connected to the heating system, the A360 T-VALVE or S360 T-VALVE are used in the same way The following illustrations show how to mount the valve.
Page 3
2) Using a flat-bladed screwdriver or a similar tool, lift the cover 3) Demount the cover and put it aside. of the thermo-valve power cord. 4) Unscrew the locking nut. 5) Remove the locking nut.
Page 4
6) Make sure your suit has a rubber backing patch bonded to 7) Place the A360 T-VALVE or S360 T-VALVE in the opening it, as it ensures tightness. of the inflation valve, putting the E/O cord in the preferred position.
MAINTENANCE Rinsing the valve: After diving, rinse the outside of the valve with fresh water. Then dry the valve: to remove residual water, it should be blown through by pressing the inflation button several times (at this time the valve must be connected to a medium pressure hose).
Page 6
The warranty does not apply to products used for military, professional, governmental or rental purposes. The Ammonite System warranty does not cover defects cau- sed by actions beyond the control of the Ammonite System, THE EXTENDED AMMOPOWER WARRANTY except for defects caused by assembly errors and inherent vices of the product or the components.
Ammonite System warranty, the original proof of purchase System dealer or send an e-mail directly to: is necessary. info@ammonitesystem.com The Ammonite System warranty is global as long as the proof of purchase is provided by an authorized Ammonite For more information, please visit: System dealer.
Page 8
Video tutorial is avalible on our website: www.ammonitesystem.com/thermovalve Plonska 5 03-683 Warsaw Poland info@ammonitesystem.com www.ammonitesystem.com...
Need help?
Do you have a question about the A360 and is the answer not in the manual?
Questions and answers