Advertisement
Quick Links
Advertisement
Related Manuals for Ammonite System LED SPELEO
Summary of Contents for Ammonite System LED SPELEO
- Page 1 SPELEO...
- Page 2 SPELEO U M B I L I C A L L I G H T...
- Page 3 LIGHT INTENSITY CONTROL Always avoid sudden cooling of LED SPELEO light. LED SPELEO is equipped with the switch that enables to regula- Do not immerse hot headlight in the water as it may cause te the light output and operating time.
- Page 4 FASTENING OF THE HEADLIGHT Ammonite System LED SPELEO is intended to be kept in the hand with or without Goodman’s handle. Thanks to Goodman’s handle both hands are free during diving. However, depending on the diver’s individual preferences, a different way of fastening of the torch is possible.
- Page 5 While in use above the surface, only for a very short time, be careful, do not touch the glass after switching off, do not cool To charge Ammonite System umbilical dive light do not use down suddenly. chargers that were not originally delivered by Ammonite Sys- Leaving the headlight on without supervision or switching it on tem.
-
Page 6: Operating Time
It is recommended to read additional information concerning Protect the batteries from the temperature above the safety regulations and use of Ammonite System dive 104 °F / 40 °C. light equipment and the rules of safe diving with additional dive Do not charge in the sun or near the other sources of heat, do lights on www.ammonitesystem.com... -
Page 7: Specification
SPECIFICATION: light intensity up to 1300 lm magnetic switch switch type 3 levels of light intensity light distribution 6° discharge warning message backup mode type of optics 1 x reflector max. length 116 mm total power 10 W max. diameter 53 mm light source 1 x LED CREE®...
Need help?
Do you have a question about the LED SPELEO and is the answer not in the manual?
Questions and answers