Samsung UN40JU7500F Service Manual page 29

3. Disassembly and Reassemble
Description
3
Remove the screws of ASSY COVER
P-REAR.
• 40": 14 EA
• 50": 15 EA
In this step, two types of screws are
used.
• 48": 17 EA / 1 EA
• 55": 17 EA / 1 EA
• 65": 18 EA / 1 EA
• 78": 22 EA / 1 EA
4
Remove the ASSY COVER P-REAR.
5
Remove the Electric tapes shown on the
image.
• EMI Point
paper from the LVDS Cable bottom,
attach the LVDS Cable to the C/
Chassis and rub the attatched
surface.
CAUTION
When assembling the TV, the electric
tapes must be applied on the same
locations.
Please remember to take a picture of
where the tapes were first applied.
3-2
: After removing release
Picture Description
Filament Tape: EMI Point
Filament Tape: Dressing Point
Cable Dressing
Screws
Torque :
7~ 8Kgf.cm.
6001-002755
Torque :
9~ 10Kgf.cm.
6003-000003