Table of Contents
Advertisement
3.5.
Sub-Contrast adjustment
Name of measuring instrument
RF generator
Base Band generator
1. Receive AV1 (PAL-M or NTSC 100% Full White or Split Colour bar shown as below).
2. Goes into service mode, choose Sub-Contrast, and it checks that data value is 512.
(It checks that an initial value is a default)
3. The colour key yellow button of remote control is pushed.
4. The OSD character of sub-contrast becomes red.
(Inside under automatic adjustment)
5. The OSD character of sub-contrast returns to white.
6. End.
1. Receive a RF.
(PAL-M or NTSC 100% Full White or Split Colour bar shown as below).
2. Goes into service mode, choose Sub-Contrast, and it checks that data value is 512.
(It checks that an initial value is a default)
3. The colour key yellow button of remote control is pushed.
4. The OSD character of sub-contrast becomes red.
(Inside under automatic adjustment)
5. The OSD character of sub-contrast returns to white.
6. End.
1. Recieve Component
(1080i/ 60Hz or 1080i/ 50Hz, 100% Full White or Split colour bar as shown below).
2. Goes into service mode, choose Sub-Contrast, and it checks that data value is 384.
(It checks that an initial value is a default)
3. The colour key yellow button of remote control is pushed.
4. The OSD character of sub-contrast becomes red.
(Inside under automatic adjustment)
5. The OSD character of sub-contrast returns to white.
6. End.
All manuals and user guides at all-guides.com
Adjustment of AV system
Adjustment of RF system
Adjustment of HD system
Connection
13
TH-42PA60L
Remarks
Remarks
Remarks
Remarks
Advertisement
Table of Contents
