Page 1
This document provides technical information for the user. Videology reserves the right to modify the information in this document as necessary. The customer should make sure that they have the most recent manual version. Videology holds no responsibility for any errors that may appear in this document.
1. Scope of Work These specifications shall be applied to: 45S10, 10.2”color TFT LCD module. 2. History Revision Issue Date Reason Rev A 08-22-2007 Initial release 07-0195 3. Specifications Display 10.2” color TFT LCD (16:9) Number of dots 800 x (R.G.B) x 480 Active Area 222(W) x 133.2(H)
Gamma voltage level 6 Gamma voltage level 4 Gamma voltage level 2 Power ground Red data (MSB) Red data Red data Red data Red data Red data (LSB) Power ground Doc # INS-45S10 Issue Date: 10/30/2007 Revision: A Page 4 of 11...
Page 5
Gamma voltage level 3 Gamma voltage level 5 Gamma voltage level 7 Gamma voltage level 9 Gamma voltage level 11 AVDD2 Voltage for analog circuit Power ground VCOM2 Common voltage Doc # INS-45S10 Issue Date: 10/30/2007 Revision: A Page 5 of 11...
Number = 2 max, Average Diameter ≦ 0.5 mm Afterimage After displaying a pattern for 5 seconds then switch to a different pattern, the previous pattern should disappear within 10 seconds. Doc # INS-45S10 Issue Date: 10/30/2007 Revision: A Page 6 of 11...
Hue (NTSC only). Saturation, Sharpness, Color Temp (Warm, Cool), Display (Full, 4:3). 4. Press “UP” & “DOWN” to increase or decrease the setting. 5. Press “POWER” to switch off the power. Doc # INS-45S10 Issue Date: 10/30/2007 Revision: A Page 7 of 11...
Please note that data in this application note is subject to change without notification! VIDEOLOGY IMAGING SOLUTIONS is an ISO 9001 registered video camera developer and manufacturer serving industrial, machine vision, biometric, security, and specialty OEM markets. Videology designs, develops, manufactures, and distributes video, image acquisition, and display technologies and products to OEMs worldwide.
Need help?
Do you have a question about the 45S10 and is the answer not in the manual?
Questions and answers