Schlagel EDI CONTROL 7 Operator's Manual

Schlagel EDI CONTROL 7 Operator's Manual

Advertisement

SCHLAGEL, INC.
Smaller size 10x8x5
Water and dust tight
Menu system for customizing
Automated configuration
Integrated Terminal/Control
This manual describes the functions of the Keypad and Menu System. An explanation of the
Error Codes including the cause and possible remedy is also included.
See the C7 Quick Install Manual for wiring and initial setup of the distributor.
EDI CONTROL 7
OPERATORS MANUAL

New Features

EDI Distributor Control 7
Spout Directory eliminates charts
Easly to add a second control point
Automated Sensor diagnostics
Front panel Reset button
Page 1 of 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EDI CONTROL 7 and is the answer not in the manual?

Questions and answers

Summary of Contents for Schlagel EDI CONTROL 7

  • Page 1 SCHLAGEL, INC. EDI Distributor Control 7 EDI CONTROL 7 OPERATORS MANUAL New Features Smaller size 10x8x5 Spout Directory eliminates charts Water and dust tight Easly to add a second control point Menu system for customizing Automated Sensor diagnostics Automated configuration...
  • Page 2 SCHLAGEL, INC. EDI Distributor Control 7 Key Pad Layout Performes a re-boot of the C7 control. Allows access to the menu of special functions to customize the display or perform special operations. Use repeted presses on this key to scroll through the Menu system. Access the function with the number shown.
  • Page 3 SCHLAGEL, INC. EDI Distributor Control MENU SYSTEM* CUSTOMIZE DISPLAY Edit Access Change the number used to access a position. (Numbers 1 – 255 are allowed.) Numbers Access keys by default are 1 through the number of ducts on the distributor. Use this if you would prefer to use a number with a special meaning.
  • Page 4 SCHLAGEL, INC. EDI Distributor Control 7 ERROR MESSAGES The C7 control continuously monitors the distributor for abnormal behavior and will notify the operator when a detectable error occurs. The notification is displayed on Line 2 of the display. Optional audible or visual alarms are available. Connected PLCs or other automation equipment are also notified of the error.

This manual is also suitable for:

Edi c7

Table of Contents