Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for VonHaus 3500021
Summary of Contents for VonHaus 3500021
- Page 1 900W ANGLE GRINDER 3500021 - Instruction Manual...
- Page 2 CONTENTS Safety Instructions Safety Instructions Safety Instructions, Safety Symbols Specification Handle Mounting/Attaching Safety Guard...
- Page 3 Attaching the Disc Powering On/Off/Maintenance/Storage Troubleshooting Warranty...
- Page 4 WARNING PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE WARNING! Read all safety warnings tools create sparks which may ignite the dust or fumes. and all instructions. Failure to follow the warnings and instructions may result in Keep bystanders, children and animals electric shock, fire and/or serious injury.
- Page 5 WARNING PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE glasses. working conditions and the work to be performed. Use of the power tool for WARNING! Wearing glasses or goggles operations different from those intended not in compliance with ANSI Z87.1 when could result in a hazardous situation.
-
Page 6: Safety Symbols
WARNING PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE better control of the power tool in operation. If damaged, have the power unexpected situations. tool repaired before use. Many accidents are caused by poorly maintained power Disconnect the plug from the power tools. -
Page 7: Specification
SPECIFICATION DRIVE DISC INPUT RATED NO LOAD VOLTAGE SPINDLE DIAMETER POWER FREQUENCY SPEED THREAD 0 -12,000 230-240 1. On/Off Slide Switch 9. Internal Flange (see page 6) 2. Spindle Shaft (see page 6) 10. Safety Guard 3. Side Handle 11. Cutting Disc (125mm) 4. -
Page 8: Handle Mounting
HANDLE MOUNTING The SIDE HANDLE (3) can be fitted to the left, right or the top of the Power Tool. Select the position which is most comfortable (without compromising safety). Screw the SIDE HANDLE (3) into the thread of the chosen position. - Page 9 ATTACHING THE DISC ATTENTION Ensure the Power Tool is unplugged from the mains before performing any assembly or maintenance tasks. Place the INTERNAL FLANGE (9) over the SPINDLE SHAFT (2), ensuring it seats correctly onto the head of the spindle. Place the required disc on top of the INTERNAL FLANGE (9), ensuring the bore fits over the step of the INTERNAL FLANGE (9).
-
Page 10: Powering On And Off
POWERING ON & OFF Plug into a suitable mains outlet. To switch on the Angle Grinder, push the ON/OFF SLIDE SWITCH (1) fully forwards to switch on. NOTE For continuous operation, push the ON/OFF SLIDE SWITCH (1) fully forwards and depress to lock it in position. -
Page 11: Troubleshooting
TROUBLESHOOTING PROBLEM SOLUTION Ensure the tool is connected to mains THE TOOL WILL NOT START power. Activate the ON/OFF Switch. Check the fuse and replace if required. Dangerous restart may have been activated. Relieve some pressure on the tool. Do not THE TOOL KEEPS KICKING/STALLING exert extra force, let the tool do the job. -
Page 12: Disposal Information
5th Floor The Tower Deva City Office Park Manchester M3 7BF Declare under our sole responsibility that the product: SKU: 3500021 Description: VonHaus 900W Angle Grinder To which this declaration relates is in conformity with the following directives: 2014/30/EU, 2006/42/EC, 2011/65/EU. -
Page 13: User Notes
USER NOTES... - Page 14 Thank you for purchasing the 900W Angle Grinder. VonHaus is a registered trademark of DOMU Brands Ltd Made in China for DOMU Brands Ltd M24 2RW.
Need help?
Do you have a question about the 3500021 and is the answer not in the manual?
Questions and answers