Page 1
20V MAX ANGLE GRINDER 3500006 - Instruction Manual CAUTION: Using this product with 1.5Ah Battery or 2.0Ah Battery can cause the Battery to overheat.
Page 3
Battery Capacity Indicator, Charging Lights Attaching the Safety Guard and Grinding Disc Battery Insertion/Removal, Powering On/Off Care & Maintenance, Troubleshooting User Notes Warranty...
Page 4
WARNING PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE GENERAL SAFETY INFORMATION. equipment such as a dust mask, non- WARNING! Read all safety warnings skid safety shoes, hard hat, or hearing and all instructions. Failure to follow the protection used for appropriate warnings and instructions may result in conditions will reduce personal injuries.
Page 5
WARNING PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE Stay alert, watch what you are doing parts, breakage of parts and any other and use common sense when operating condition that may affect the power tool’s a power tool. Do not use a power tool operation.
Page 6
WARNING PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE supplied as this is potentially dangerous. uneven surface as a fall may cause serious Do not plug anything other than the damage. supplied battery into the charger as other Do not operate the charger in a cabinet objects may touch dangerous voltage or other enclosure unless proper...
Page 7
WARNING PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE damp cloth. Use of any other cleaners is Always allow the battery to cool down not recommended. after charging. Do not leave in a hot Do not pull on the lead of the charger environment.
Page 8
Deva City Office Park Manchester M3 7BF Declare under our sole responsibility that the product: SKU: 3500006 Description: VonHaus 20V Max Angle Grinder To which this declaration relates is in conformity with the following directives: 2014/30/EU, 2014/35//EU, 2006/42/EC, 2011/65/EU, 2013/56/EC...
Page 10
BATTERY CAPACITY INDICATOR When in use you can check the status of the 20V Max Battery (12) by pressing the Battery Level Indication Button (15). Pressing this will illuminate the 20V Max Battery’s level of charge. 0-10% Charged 10-25% Charged 25-50% Charged 50-75% Charged 100% Charged...
Page 11
ATTACHING THE SAFETY GUARD & THE GRINDING DISK WARNING! Always make sure that the Battery is removed from the Angle Grinder before making adjustments or performing maintenance to the tool. Take the Guard (9) and slot over the Shoe (1). Align Close to secure the notches and secure into place by closing the clip and then tightening the screw.
Page 12
BATTERY INSERTION/REMOVAL WARNING! Before making any adjustments ensure the appliance is switched off or remove the 20V Max Battery (12). Hold the Angle Grinder with one hand and the 20V Max Battery (12) with the other. To install, push and slide 20V Max Battery into the battery port, make sure the Battery Release Button (13) of the 20V Max Battery snaps into place and is secure before beginning operation.
Page 13
CARE AND MAINTENANCE WARNING! Always make sure that the Battery is removed from the Angle Grinder before making adjustments or performing maintenance to the tool. To clean the Angle Grinder effectively, it is CAUTION: Never use any caustic agents - such as recommended to use compressed air.
Page 15
WARRANTY To register your product and find out if you qualify for a free extended warranty please go to www.Vonhaus.com/warranty. Please retain a proof of purchase receipt or statement as proof of the purchase date. The warranty only applies if the product is used solely in the manner indicated in the Warnings page of this manual, and all other instructions have been followed accurately.
Page 16
Thank you for purchasing the 20V Max Angle Grinder VonHaus is a registered trademark of DOMU Brands Ltd ® Made in China for DOMU Brands Ltd M24 2RW...
Need help?
Do you have a question about the 3500006 and is the answer not in the manual?
Questions and answers