Page 2
ITEMS INCLUDED WITH MODEL TCT-355 MAINTENANCE GENERAL MAINTENANCE Cable Tester Remote To clean, wipe the case with a damp cloth and detergent (do not use abrasives or solvents). When the power LED does not light when the unit is switched on, you need to replace the battery.
Page 3
WIRING SCHEMES INTRODUCTION The TCT-355 Cable Tester is a convenient instrument for testing different shielded/unshielded wiring schemed communication cable with RJ-11 and RJ-45 connectors and coax cable. This tester can be used for testing cables before and/or after they are installed. Testing status is indicated by multiple LEDs.
Page 4
1. Caution: Do not connect the cable tester to live circuits as it may be damaged by over voltage. 2. Turn on the TCT-355. If the power light ( O ) does not light, please replace the 9V battery with a new one.
Need help?
Do you have a question about the TCT-355 and is the answer not in the manual?
Questions and answers