CROWN VERITY SB-1 Operating And Installation Instructions

Advertisement

OPERATING AND INSTALLATION INSTRUCTIONS
PLEASE READ THE MCB OWNER'S MANUAL, REFERENCES ARE MADE TO
IT. OBEY ALL SAFETY WARNINGS AND PROCEDURES.
Thank you for purchasing this quality product.
With proper use the SB-1 side burner will enhance the
outdoor cooking experience for many years.
FOR YOUR SAFETY
Do not store or use gasoline or other
flammable vapors or liquids in the
vicinity of this or any other appliance.
MODEL# SB-1
CROWN VERITY SIDE BURNER
REV. 01 / 02
RETAIN FOR FUTURE REFERENCE
Crown Verity inc. is proud of this product.
We hope you will enjoy using it.
This appliance is for operation outdoors only
ANSI Z83.11A / CGA 1.8 - M 97
Photo
WARNING: Improper installation,
adjustment, alteration, service or
maintenance can cause property
damage, injury or death. Read the
installation, operating & maintenance
instructions thoroughly before installing
or servicing this equipment.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SB-1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for CROWN VERITY SB-1

  • Page 1 IT. OBEY ALL SAFETY WARNINGS AND PROCEDURES. Photo Thank you for purchasing this quality product. With proper use the SB-1 side burner will enhance the outdoor cooking experience for many years. Crown Verity inc. is proud of this product. We hope you will enjoy using it.
  • Page 2 The SB-1 side burner is offered in both mobile and built-in versions. The mobile unit, which attaches to the right side of all MCB charbroilers, is offered in L.P (propane) gas only. The built in version SB-1-BI is offered in both L.P. and Nat. gas. Installation must conform with local codes.
  • Page 3 FIG.1 FIG.2 FIG.3 FROM SIDE BURNER FIG.4 FIG.5 FIG.6...
  • Page 4 It is very important that the side burner be connected to the correct type of gas and is regulated at the correct pressure. The rating plate on all SB-1 units contains this and other important information and must be observed.
  • Page 5 Operation Operating your SB-1 side burner is relatively simple. Once you have properly installed the unit and performed a leak test, you may proceed. START-UP 1. Remove the protective cover while lighting. 2. Push and turn the burner valve counter-clockwise to the low setting and light the burner through the grate with a book match or lighter.
  • Page 6 Maintenance and Cleaning Very little maintenance is required to keep your SB-1 side burner in top operating condition. Periodic cleaning should be done to the cabinet, grate and the burner head. The burner can be removed by loosening the small nut under the burner head and removing the retainer bracket.
  • Page 8 CROWN VERITY INC., 37 ADAMS BLVD., BRANTFORD, ON. CAN. N3S 7V8 TEL: (519) 751-1800 FAX: (519) 751-1802 www.crownverity.com Email: info@crownverity.com...

Table of Contents