Basic Operation - Hoelzle D14330 Operating Instructions Manual

7. Basic Operation

Installation of Base Support:

① Adjust monitor level by sliding the support to the desired height.
② Adjust the angle of the monitor and tighten the knob on the center mounting bracket.
Installation of U-support bracket:

Angle adjustment
screws
Connection of AV Conversion Cable

Hold the cable , align the side of jack
marked with
connector with the male 13-pin connector
marked with
① White 4 pin male for Camera 1.
② Blue 4 pin male for Camera 2.
③ Brown 4 pin male for Camera 3.
④ Single red wire to power wire of DC : 10-32V.
⑤ Single black wire to GND.
⑥ Single white wire to positive power wire of the Camera 1.
⑦ Single blue wire to positive power wire of Camera 2.
⑧ Single brown wire to positive power wire of Camera 3 .
on the female 13-pin
then firmly plug together.
Support
attaching
piece
Knob
Knob
8