Tannoy Pole Mount Adapter Installation Instructions Manual

Pole Mount Adaptor
Tannoy Pole Mount Adaptors facilitate the installation
and mounting of speakers onto beams, poles and posts,
providing robust support in both indoor and outdoor
applications. Pole Mount Adaptors can be used with
standard Tannoy yoke brackets or K-Ball brackets. Pole
Mount Adaptors are available in black and white or they can
be painted to match the surrounding space. The adapter
will fix to poles ranging from 77 to 228 mm diameter.
Installation Using Yoke Brackets
• •
Use the fixings supplied with your speaker to fix the
empty yoke bracket to the un-mounted pole bracket
adaptor. (Different speaker models require different
numbers of fixing screws. Refer to your speakers'
documentation for details.)
• •
Fix the pole mount bracket adaptor to the pole using
the strapping provided. The bracket can be mounted
in portrait or landscape orientations.
• •
See the main product QSG for further specific
information about proper connection and fixings for
your speaker.
Installation Using K-Ball Brackets
• •
Pass the speaker wire through the un-fixed pole
mount adaptor plate.
• •
Connect the speaker wires to the connector block in the
rear of the K-Ball bracket. (See the K-Ball documentation
for specific connection instructions.)
• •
Offer the K-Ball bracket up to the adaptor plate
(if outdoors, with the foam gasket squeezed in
between, if outdoors).
V 2.0