LG WFT60A30D Service Manual page 19

https://appliancetechmanuals.com
Close the lid
3
The pulsator rotates for Water will be
8 seconds to detect the supplied for 2
laundry load. minutes after the
Then the WATER LEVEL start of the wash to
and the amount of supplement the
Detergent to be used water the laundry
will be shown and has absorbed.
water will be supplied.
4
4
4
4
Finish
5 6
When the wash
program ends, the
buzzer will ring
for 10 seconds
before the Power
goes off
automatically.
7
6
7
6
7
6
7
6
Caution & N ote
If water is already in the tub, or putting wet
laundry into the tub before starting will
increase the WATER LEVEL.
With lightweight bulky loads, WATER LEVEL
can be set low.
Changes to Water Temperature
(HOT/COLD) and wash level are possible
during operation.
When setting the WATER LEVEL manually,
do not set to Medium to prevent damage to
laundry.
Washing with HOT water may damage the
laundry (Water is set to cold automatically).
Ensure that the load is under 2kg.
In order to avoid damage to laundry,
the spin cycle may appear slow.
This also avoids wrinkles and clothing may
still contain some water. This is normal.
If WOOL wash is selected, GENTLE SPIN
will be set automatically.
Before starting to wash, make sure that the
laundry is washable.
Washing with HOT water may damage the
laundry (Water is set to COLD
automatically).
19