Equalizer (Eq); Changing The Input Source - G-project G-Boom 3 Manual

BLUETOOTH WIRELESS BOOMBOX

EQUALIZER (EQ)

There are 3 EQ presets:
EQ1 = (Default) Dynamic: full bass and crisp high frequencies.
EQ2 = Deep: Added emphasis on bass and low mids frequencies.
EQ3 = Bright: Added emphasis on mids, vocals and high frequencies.
Press the EQ Button repeatedly to cycle through them. The LED ring will ash
1, 2 or 3 times when the EQ button is pressed to indicate preset EQ1, EQ2
or EQ3 respectively.

CHANGING THE INPUT SOURCE

When the G-BOOM3 powers "ON", the default audio input source is Bluetooth.
To switch to Radio, press the FM Radio button once and G-BOOM3 will enter FM
Radio mode.
NOTE: If inserting audio cable into the Line-In Jack, G-BOOM3 will change to Line-In mode
automatically regardless of the current input source.