Power Source; Recharge Battery - G-project G-Boom 3 Manual

POWER SOURCE

Connect the supplied AC adapter (DC 12V 1.5A) to the DC IN Jack on the back of
G-BOOM3 and plug the other end into a standard wall outlet (100~240V 50-60Hz).
NOTES: Disconnect both ends of the AC adapter when not in use. Use only the supplied
AC adapter with the following spec: AC In - 100-240V AC, 50/ 60Hz / DC Out - 12V 1.5A

RECHARGE BATTERY

Connect the supplied AC adapter to the DC IN Jack on the
back of G-BOOM3 and plug the other end into a standard wall
outlet to being automatically recharging the built-in battery. The
red LED charging light on G-BOOM3 will illuminate to indicate
charging process and turn off when the battery is fully charged.
WHEN TO RECHARGE BATTERY
When G-BOOM3 battery is low, the red LED Charging indicator will begin ashing
to warn you to recharge your G-BOOM3 for continued use and enjoyment.
• The battery is internal and cannot be replaced
• Actual battery life varies with use, settings, and environmental conditions
NOTES
• Rechargeable batteries have a limited number of charge cycles
• Charge the rechargeable battery at least biannually
AC outlet
AC adapter