Page 1
Ok, let’s get started! This is easy. You don’t have to be a DIY expert to assemble this product. Just follow our instructions and you will have a show-off worthy addition in no time. 15-20 min. people required estimated installation time...
what to do Put on mood music! To prevent damage to product, use the clean side of package carton or rug as working surface for assembly. While assembling the product, tighten the bolts up to 50%. Once all parts in place, only then fully tighten the bolts.
product parts Metal Rod Table Top Metal Base B-Right B-Left Left Metal Leg Right Metal Leg...
Page 5
assembly instructions Friendly Tip: Take a deep breath going in. This may be a tricky part, but nothing too overwhelming. Just follow these steps to the T and the outcome will be worth it! step 1: To set the base of the table, join the table legs (B-Left &...
Page 6
step 3: Next, turn the table top (A) upside down and set the metal base on top of it as shown in this image. step 4: See the areas highlighted in red to know where to tighten screws (G) and washers (E &...
Page 7
step 5: Place them on top of each other (F on top of E & G on top of F). Using the Allen Key, tighten all screws (G) to fix the base to the table. step 6: Pull on the ribbon to open the drawer.
Page 8
step 7: Using the Allen Key (I), detach the handle fitted inside the drawer. step 8: Place the handle outside the drawer and re-attach using the screws that you just removed and tighten using the Allen Key (I). Voila! Your desk is now assembled and secure!
Page 9
to err is human Drop-tested packing, double-checks, experienced craftspeople, high-end materials- we keep everything in mind to ensure your furniture arrives at your doorstep without any problems. But mistakes can sometimes happen because, well, to err is human. So, in the event of missing parts, delivery problems, damaged parts, please reach out to our team.
Need help?
Do you have a question about the MH-TB-21001 and is the answer not in the manual?
Questions and answers