Nemo GRABO Operator's Manual page 17

EXPLANATION OF SYMBOLS USED ON TOOL
➋
Read the operator's manual before use
➌
Wear protective shoes and gloves
➍
Do not dispose of the tool together with household waste material
NOISE EMISSION/VIBRATION
• A-weighted sound pressure level LpA=79.4 dB(A), uncertainty K=3 dB(A). A-weighted
sound power level LwA=71.4 dB(A), uncertainty K=3 dB(A).
• Vibration total value=1.240 m/s
value has been measured in accordance with a standard test method and may be used for
comparing one tool with another. The declared vibration total value may also be used in a
preliminary assessment of exposure.
! WARNING: The vibration emission during actual use of the power tool can differ from
the declared total value depending on the ways in which the tool is used. It is needed to
identify safety measures to protect the operator based on an estimation of exposure in
the actual conditions of use (under consideration of all parts of the operating cycle, such
as the times when the tool is switched off and when it is running idle, in addition to the
trigger time).
TRANSPORT
The lithium-equivalent content in the batteries is below applicable limit values. Regulations
governing hazardous goods may be relevant when transporting several batteries. In this case,
it may be necessary to comply with special conditions, such as those governing packaging.
Always make sure to observe the national installation regulations
ASSEMBLY
CONNECTING A STRAP TO THE NEMO GRABO® ➎
• Optionally, you can attach a strap to the Nemo GRABO® to carry the device safely.
Locate the four attachment rings Ⓕ.
1.
2. Connect a strap to any two of these attachment rings.
3. Secure each of the clips at the ends of a strap into an attachment ring.
OPERATION
LIFTING TECHNIQUES
• Plan ahead. Know what you are lifting and how you will lift it. Be aware of the weight of the
object. Determine whether or not it is safe to lift on your own. Make sure the work area is
flat, dry, and clear of debris.
• Check your path. Make sure the lift path is clear. Remove any tripping hazards or debris.
Check for any wet or slick surfaces.
• Use ergonomic equipment. Use lift assists, such as a forklift, dolly, cart, hand truck, or
hoist. Make sure you are trained before using the equipment.
• Get help when needed. When lifting awkward or heavy loads, utilize a two person lift. Make
sure you lift at the same time and keep the load level.
• Wear proper required protective shoes and gloves.
2 , uncertainty K=0.11 m/s
NEMO GRABO | Operator's manual
2 . The declared vibration total
17