Adapter Plugs - GE JES0736SPSS Owner's Manual

ADAPTER PLUGS

(Adapter plugs not
permitted in Canada)
Align large
prongs/slots
Ensure proper ground
and firm connection
TEMPORARY
METHOD before use.
Usage situations where
appliance's power cord will
be disconnected infrequently.
Because of potential safety
hazards under certain
conditions, we strongly
recommend against the
use of an adapter plug.
However, if you still elect
to use an adapter, where
local codes permit,
a TEMPORARY
CONNECTION may
be made to a properly
grounded two-prong wall
receptacle by the use of a
UL listed adapter which
is available at most local
hardware stores.
The larger slot in the
adapter must be aligned
with the larger slot in the
wall receptacle to provide
proper polarity in the
connection of the power
cord.
CAUTION: Attaching the
adapter ground terminal
to the wall receptacle cover
screw does not ground the
appliance unless the cover
screw is metal, and not
insulated, and the wall
receptacle is grounded
through the house wiring.
You should have the
circuit checked by a
qualified electrician to
make sure the receptacle
is properly grounded.
When disconnecting
the power cord from
the adapter, always hold
the adapter with one hand.
If this is not done,
the adapter ground
terminal is very likely to
break with repeated use.
Should this happen, DO
NOT USE the appliance
until a proper ground has
again been established.
Usage situations where
appliance's power cord will
be disconnected frequently.
Do not use an adapter plug
in these situations because
frequent disconnection
of the power cord places
undue strain on the adapter
and leads to eventual
failure of the adapter
ground terminal. You
should have the two-prong
wall receptacle replaced
with a three-prong
(grounding) receptacle
by a qualified electrician
before using the appliance.
11