Subscribe to Our Youtube Channel
Related Manuals for Spraying Systems Co AA190DAG Series
Summary of Contents for Spraying Systems Co AA190DAG Series
- Page 1 AA190DAG/DAGH SERIES AIR MOTOR-DRIVEN TANK CLEANER OWNER’S MANUAL MI-AA190DAG/DAGH...
-
Page 2: Table Of Contents
TABLE OF CONTENTS FORWARD ........................... 3 INTRODUCTION .......................... 3 SPECIFICATIONS AND OPERATING CONDITIONS ................4 DATA SHEETS AIR MOTOR DRIVEN TANK CLEANER FEATURES AND ORDERING – DS 190DAG ........ 5 TANK CLEANER DIMENSIONAL DATA AND FLOW RATE DATA – DS 190DAG-1 ........6 AIR MOTOR DRIVEN TANK CLEANER FEATURES AND ORDERING –... -
Page 3: Forward
BECOME SYNONYMOUS WITH THE NAME SPRAYING SYSTEMS CO. THE DESCRIPTION AND SPECIFICATIONS CONTAINED HEREIN WERE EFFECTIVE ON THE REVISION DATE OF THIS MI. SPRAYING SYSTEMS CO. RESERVES THE RIGHT TO ALTER OR MODIFY ANY UNIT SPECIFICATION ON SPRAYING SYSTEMS CO. PRODUCT WITHOUT NOTICE OR OBLIGATION. -
Page 4: Specifications And Operating Conditions
SPECIFICATIONS & OPERATING CONDITIONS • LIQUID PRESSURE: 500 PSI (35 BAR) MAX FOR AA190DAG 1000 PSI (69 BAR) MAX FOR AA190DAGH • FLOW RATES: UP TO 20 GPM (76 L/M) • PRESSURE DROP AT MAX. FLOW: 40 PSI (2.8 BAR) •... -
Page 5: Air Motor Driven Tank Cleaner Features And Ordering - Ds 190Dag
AA190DAG Series Air Motor‐Driven Tank Washer | 08/15/2011 | REV. 1 ... -
Page 6: Tank Cleaner Dimensional Data And Flow Rate Data - Ds 190Dag-1
AA190DAG Series Air Motor‐Driven Tank Washer | 11/11/2010 | REV. 1 ... -
Page 7: Air Motor Driven Tank Cleaner Features And Ordering - Ds 190Dagh
AA190DAG Series Air Motor‐Driven Tank Washer | 08/15/2011 | REV. 1 ... -
Page 8: High Pressure Tank Cleaner Dimensional Data And Flow Rate Data - Ds 190Dagh-1
AA190DAG Series Air Motor‐Driven Tank Washer | 11/11/2010 | REV. 1 ... -
Page 10: Safety Precautions
SAFETY PRECAUTIONS CERTAIN ATMOSPHERES WITHIN THE TANK BEING CLEANED COULD BECOME EXPLOSIVE, SUCH AS DUST PARTICLES IN FLOUR SILO, OR FUMES IN PAINT MIXING TANKS. FOR THIS REASON, THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE OBSERVED. YOUR SAFETY AND THE SAFETY OF OTHERS IS EXTREMELY IMPORTANT. WE HAVE PROVIDED IMPORTANT SAFETY MESSAGES IN THIS MANUAL FOR YOUR PRODUCT. -
Page 11: Mounting
INPORTANT! EXHAUST CONNECTION IS THE THREADED CONNECTION ON THE LEFT AS YOU FACE THE MOTOR OPENINGS (MAKRED “OUT”). CONNECT THE LUBRICATOR SUB-ASSEMBLY TO THE AIR INLET CONNECTION OF THE AIR MOTOR. THE INLET CONNECTION IS THE THREADED CONNECTION ON THE RIGHT AS YOU FACE THE MOTOR OPENINGS (MARKED “AIR IN”). -
Page 12: Grounding
DANGER IT IS YOUR RESPONSIBILITY TO ENSURE THAT THERE IS NO POSSIBILITY OF THE MOVING PARTS COMING IN CONTACT WITH FIXED OBJECTS. FAILURE TO INSTALL THE TANK CLEANER WITH SUFFICIENT CLEARANCES COULD RESULT IN THE GENERATION OF SPARKS WITH A RESULTANT EXPLOSION OR FIRE. IF YOU DO NOT FOLLOW THESE INSTRUCTIONS, YOU MAY BE KILLED OR SERIOUSLY INJURED. -
Page 13: Air Motor Lubrication
AIR MOTOR LUBRICATION USE DETERGENT SAE #10 AUTOMOTIVE ENGINE OIL. CONSULT WITH YOUR LOCAL SUPPLIER OF LUBRICANTS OR CONTACT YOUR LOCAL SPRAYING SYSTEMS CO. SALES OFFICE. AUTOMATIC LUBRICATION INLINE AIR LUBRICATOR SHOULD BE ADJUSTED TO FEED 1 DROP OF OIL PER MINUTE (60 SEC). -
Page 14: Maintenance
MAINTENANCE IT IS YOUR RESPONSIBILITY TO REGULARLY INSPECT AND MAKE NECESSARY REPAIRS TO THIS PRODUCT IN ORDER TO MAINTAIN PROPER OPERATION. IT IS RECOMMENDED THAT THE BUSHINGS AND SEALS BE INSPECTED EVERY 1000 HOURS OF OPERATION OR SOONER IF EXCESSIVE LEAKAGE OF THE SEALS OCCURS. REMOVAL AND REPLACEMENT OF SPRAY NOZZLES (ITEM 17 ON PARTS LIST DRAWING PL 190DAG &... -
Page 15: Reassembly Of Unit
Inspect O-Rings inside the upper shaft seal body Remove any foreign material from gear teeth of the sub-assembly (4) and seals inside pinion gear pinion gear bushing retainer sub-assembly (22) bushing retainer sub-assembly (22). before reassembly. If damaged or worn, replace with new sub- assemblies. -
Page 16: Air Motor Driven Tank Cleaner - Pl 190Dag
AA190DAG Series Air Motor‐Driven Tank Washer | 08/15/2011 | REV. 1 ... -
Page 17: Parts Lists
AA190DAG Series Air Motor‐Driven Tank Washer | 08/15/2011 | REV. 1 ... -
Page 18: Air Motor Drive Assembly - Pl 46340
AA190DAG Series Air Motor‐Driven Tank Washer | 08/15/2011 | REV. 1 ... -
Page 19: Lubricator Assembly - Pl21030
AA190DAG Series Air Motor‐Driven Tank Washer | 08/15/2011 | REV. 1 ... -
Page 20: Warranty
WARRANTY SPRAYING SYSTEMS CO. WARRANTY SELLER WARRANTS THAT ITS PRODUCTS WILL CONFORM TO AND PERFORM IN ACCORDANCE WITH THE PRODUCTS’ SPECIFICATIONS. SELLER WARRANTS THAT THE PRODUCTS DO NOT INFRINGE UPON ANY COPYRIGHT, PATENT OR TRADEMARK. THE FOREGOING WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THOSE CONCERNING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. -
Page 21: Maintenance Record
MAINTENANCE RECORD DATE PROCEDURE PERFORMED... -
Page 22: Declaration Of Conformity
I hereby declare that the equipment named above has been designed to comply with the relevant sections of the above referenced specifications. The unit complies with all applicable Essential Requirements of the Directives. Signed by: Robert J. Adams, P.E. Director of Engineering-Industrial Division Spraying Systems Co. - Page 23 North Avenue and Schmale Road, P.O. Box 7900, Wheaton, IL 60187-7901 Tel: 1.800.95.SPRAY Intl. Tel: 1.630.665.5000 Fax: 1.888.95.SPRAY Intl. Fax: 1.630.260.0842 Visit our Website at http://www.spray.com...
Need help?
Do you have a question about the AA190DAG Series and is the answer not in the manual?
Questions and answers