Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Spraying Systems Co TankJet 65
Summary of Contents for Spraying Systems Co TankJet 65
- Page 1 TankJet ® Tank Cleaner USER GUIDE TJ65 spray.com...
-
Page 2: Table Of Contents
CONTENTS GENERAL SAFETY INSTRUCTIONS ............. . . 3 PRINCIPLES OF OPERATION . -
Page 3: General Safety Instructions
This equipment includes but is not limited to: The container being cleaned should be sealed as best as • Protective hat possible while the TankJet 65 models is running its cycle . The combination of temperature, cleaning solution, spray • Safety glasses or face shield impact and the potential toxic materials being cleaned can •... -
Page 4: Principles Of Operation
. To obtain cycle time, divide 45 by the RPM of the head . TANKJET 65 MODEL: Normal rotation of the TankJet 65 is 5-40 RPM at 50 to 150 SSCo. Part # Description PSI (3 .4 to 10 .3 BAR) inlet pressure . The nozzle holes in the nozzle body (11) are set off of true center in favor of rotation. -
Page 5: Installation
INSTALLATION TROUBLE SHOOTING The TankJet 65 is easy to install as it has a single female Due to the simplicity of the unit, few problems should ® pipe thread connection (NPT or BSPT) . It may be installed occur . If any trouble should arise, the following steps may as a swing away unit or suspended from a pipe . -
Page 6: Assembly
position of the stream straightener in the nozzle TJ65-HT = Invert the vertical shaft bushing (21) bore . thru the cap/gear assembly from the bottom, apply b . Loosen the 3 set screws (13) from tee (12) a water film in raceway, place the stainless steel c . -
Page 7: Warranty
d. Insert the vertical shaft/ rotor assembly thru the bearing bushing (21) in the lower cap assembly . Screw the vertical shaft into the tee (12) and tighten . Secure all shafts to the tee (12) by installing the 3 set screws (13). (Apply 20 in/lbs). e . -
Page 8: Parts List
PARTS LIST... -
Page 9: Standard Model Specifications
STANDARD MODEL SPECIFICATIONS TJ65-375 TJ65-313 TJ65-250... -
Page 10: High Temperature Model Specifications
HIGH TEMPERATURE MODEL SPECIFICATIONS TJ65-375-HT TJ65-313-HT TJ65-250-HT... - Page 11 12/7/2020 Wheaton, Illinois, USA EC DECLARATION OF INCORPORATION Spraying Systems Co. ® North Avenue and Schmale Road, P.O. Box 7900, Wheaton, IL 60187-7901 Tel: 1.800.95.SPRAY Intl. Tel: 1.630.665.5000 Fax: 1.888.95.SPRAY Intl. Fax: 1.630.260.0842 Visit our Website at http://www.spray.com for local representatives...
- Page 12 P.O. Box 7900, Wheaton, IL 60187-7901 USA Tel: 1.800.95.SPRAY Intl. Tel: 1.630.665.5000 Fax: 1.888.95.SPRAY Intl. Fax: 1.630.260.0842 www.spray.com MI-TJ65 Tank Cleaner rev. 2/4/2021 ǀ © 2021 Spraying Systems Co.
Need help?
Do you have a question about the TankJet 65 and is the answer not in the manual?
Questions and answers