Table of Contents
Advertisement
The three tools above can be used
three tools above can be used to isolate an issue to the wireless link only, not involving
other network elements such as switches and host computers. You can ping the remote unit
ements such as switches and host computers. You can ping the remote unit
ements such as switches and host computers. You can ping the remote unit
from the unit you are accessing via the user interface. A default gateway and DNS server are
from the unit you are accessing via the user interface.
needed to use these tools with a named target. Configuration -> Ethernet Configuration
needed to use these tools with a named target.
You can also navigate to Status
unit, as shown in the screen below:
, as shown in the screen below:
There are additional diagnostic tools to arrange automatic rebooting of the unit periodically or
There are additional diagnostic tools to
under certain circumstances.
isolate an issue to the wireless link only, not involving
Status -> ARP to view the ARP status for both Master unit
arrange automatic rebooting of the unit periodically or
A default gateway and DNS server are
Ethernet Configuration
43
Master unit and Slave
Advertisement
Table of Contents
