System Reboot And Logout - Solectek SKYWAY-ESSENCE Series User Manual

host computer and then click Flash firmware to write the new image into the radio host computer and then click
memory.
WARNING
upload process.
during the flash write process. during the flash write process.
15. System Reboot

System Reboot and Logout

Navigate to Tools->Reboot to
The following confirmation screen will appea The following confirmation screen will appear to make sure that the reboot process was not
initiated accidentally.
Click on the Reboot button to reset/reboot. The reboot process will take approximately
seconds. Once the rebooting
Navigate to Logout on the menu to log out of the GUI session. Similar to the reboot process
above, a confirmation screen will appear as follows: above, a confirmation screen will appear as follows:
- Do not power down or unplug the unit during the upgrade Do not power down or unplug the unit during the upgrade/file Do not power down or unplug the unit during the upgrade
process. Software image corruption may occur if power is disrupted Software image corruption may occur if power is disrupted
to reboot the radio system.
button to reset/reboot. The reboot process will take approximately 30 button to reset/reboot. The reboot process will take approximately
is finished, the browser refreshed the current page automatically. , the browser refreshed the current page automatically.
on the menu to log out of the GUI session. Similar to the reboot process on the menu to log out of the GUI session. Similar to the reboot process
to write the new image into the radio's flash
r to make sure that the reboot process was not
41