Conquer 355-RACESIM3 Manual page 6

Step 4: Get behind the seat bottom as it rests on base. For shipping purposes, the seat
back incline bracket is too far forward (fig. 15) to install the seat back to the seat bottom.
Grasp the seat back incline lever to release, then pull the seat back incline bracket until
it is at a 90˚ angle (fig. 16). Remove pre-installed bolts and screw from right side seat
back (fig. 17). Remove bolt and screw from left side of seat back (fig. 18).
15
17
EMAIL: customercare@conquerequipment.com
Product name: Conquer Racing Simulator Seat
SKU: 355-RACESIM3
EMAIL: customercare@conquerequipment.com
TEL: 855-349-4327
help.ConquerEquipment.com
16
18
WEB: help.conquerequipment.com TEL: 855-349-4327