Table of Contents
Related Manuals for FSN IPS100A
Summary of Contents for FSN IPS100A
- Page 1 Image Processing System Instructions for Use IPS100A Quad SDI to 12G SDI / HDMI 4K Converter IPS500A Universal Converter Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely. English...
-
Page 2: Table Of Contents
Cleaning Instructions ......31 IPS100A Package Contents ......14 Installation . -
Page 3: Product Description / Intended Use
Product Description / Intended Use IPS100A IPS500A IPS100A is a video signal converter that IPS500A is a universal converter that features accepts quad SDI (3G or 12G) input up to 4K, advanced video distribution and control. and delivers single SDI (3G or 12G) or HDMI 2.0 It accepts a variety of video input signals output up to 4K. -
Page 4: Symbol Defi Nitions
Symbol Defi nitions The following symbols appear on the product, its labeling, or the product packing. Each symbol carries a special defi nition, as defi ned below: Dangerous : High Consult accompanying Power adapter Voltage documents lndicates equipotential Direct current Unique Device Identifi er earth ground Indicates protective... -
Page 5: Warnings, Precautions
This device complies to the above standards only when used with the supplied medical grade power supply. Use 120V rating 5-15P type plug only in the U.S. IPS100A - ATM065T-P120 IPS500A - JMW190KB1200F04 Caution: Make sure the power cord is the correct type that is required in your geographic area. - Page 6 Use the proper power cord with correct attachment plug type. If the power source is 120 V AC, use a power cord which is a Hospital Grade Power Cord with NEMA 5-15 style plug, labeled for 125 volts AC with UL and C-UL approvals. If the power source is a 240 V AC supply, use the tan- dem (T blade) type attachment plug with ground conductor power cord that meets the respec- tive European country’s safety regulations.
-
Page 7: Safety Instructions
Safety Instructions On Safety 1. Before connecting the AC power cord to the DC adapter outlet make sure the voltage desig- nation of the DC adapter corresponds to the local electrical supply. 2. Never insert anything metallic into the cabinet openings of the device. Doing so may create the danger of electric shock. - Page 8 Environmental Conditions for Operation and Storage Temperature range within 0°C to 40°C(operation), -20°C to 60°C (storage) Relative humidity range 10% to 85% Atmospheric pressure range within 500 to 1060hPa. On Installation 1. Openings in the device cabinet are provided for ventilation. To prevent overheating, these openings should not be blocked or covered.
- Page 9 Returned Product After troubleshooting, if problems persist, disinfect the device and return it to FSN using the original packaging. Include the accessories that came with the device in the return shipment. Please enclose a brief explanation of the malfunction.
-
Page 10: Electromagnetic Compatibility
Electromagnetic Compatibility This unit has been designed and tested to comply with IEC 60601-1-2:2014/AMD1:2020 require- ments for EMC with other devices. To ensure electromagnetic compatibility (EMC), the device must be installed and operated according to the EMC information provided in this Instructions for Use. - Page 11 1. Guidance and manufacturer’s declaration - electromagnetic emission The device is intended for use in the electromagnetic environment specifi ed below. The user of the device should make sure that the device is operated in such an environment. Interference emission measurements Conformity level Electromagnetic environment -guidance RF emissions acc.
- Page 12 3. For the use of ME devices in professional healthcare facilities. Test specifi cation for ENCLOSURE PORT IMMUNITY to RF wireless communica- tions equipment (according to IEC 60601-1-2:2014) The device is intended for use in the electromagnetic environment specifi ed below. The user of the device should make sure that it is used in such an environment.
- Page 13 4. Guidance and manufacturer’s declaration – electromagnetic immunity – for equipment and systems that are not life-supporting The device is intended for use in the electromagnetic environment specifi ed below. The user of the device should make sure that it is used in such an environment. Interference IEC 60601-1- Conformity...
-
Page 14: Ips100A
(m) can be estimated using the equation applicable to the frequency of the transmitter, where is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer. Accessories IPS100A IPS100A Machine screws M4... -
Page 15: Installation
Connecting Inputs and Outputs IPS100A Quad SDI (3G or 12G) input up to 4K Single SDI (3G or 12G) or HDMI 2.0 output up to 4K Connecting the Power Supply Power input on IPS100A AC power AC power cord (not included) - Page 16 (debug) (service/fi rmware) Green LED indicators will illuminate solid (lock) when a video signal is detected. To prevent damage from overheating, IPS100A will shutdown when internal temperatures be- come too excessive. Both side LEDs will blink if thermal shutdown has occurred.
-
Page 17: Settings
Settings IPS100A Mode select switch When switch 8 is off , switches 1 - 7 are active (manual control). When switch 8 is on, software/ service control is active. Input Video Switch Settings Quad Quad Single Square Division 2 SI... -
Page 18: Video Resolution Timing
Video Format IPS100A 4K-12G 4096 x 2160p ST2082/10, ST425-5 1920 x 1080i ST372 UHD-12G 3840 x 2160p ST2082/10, ST425-5 1280 x 720p ST296 2048 x 1080p ST425-1 720 x 576i ST259 HD-3G 1920 x 1080p ST425-1 720 x 480i ST259 Video Input *B = Level B-dual link. - Page 19 Video Output IPS100A HDMI (Type A connector) - 1x HDMI , YUV and RGB, 4:2:2 And 4:4:4 (HDMI V2.0) 4096 x 2160p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 3840 x 2160p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 4096 x 2160p 23.98, 24, 25, 29.97, 30...
-
Page 20: General Specifi Cation
Dimensions IPS100A 130.5 M4, 5mm depth 9/2021... - Page 21 130.5(W) x 103(H) x 40(D) mm Unit Dimension 5.13(W) x 4.05(H) x 1.57(D) inch 242(W) x 187(H) x 72(D) mm Package Dimension 9.53(W) x 7.36(H) x 2.83(D) inch 0.48Kg, 1.06 lbs. (IPS100A) Weight 1.01Kg, 2.23 lbs. (shipping package) Power Supply Item Description...
-
Page 22: Installation
Accessories IPS500A Instructions for Use AC power cord Medical AC power adaptor (6 ft., medical grade) JMW190KB1200F04, 12V/7A Controls IPS500A The 8 button keypad located on the front panel, allows the user to make adjustments to various display parameters. DVI OUT HD-SDI DVI 2 IN COMPOSITE... -
Page 23: Ips500A
Connecting Inputs and Outputs IPS500A DVI OUT HD-SDI DVI 2 IN COMPOSITE S-VIDEO RGB/RGBS/YPbPr IN VGA IN ON/OFF DVI 1 IN DC-IN DC-OUT DVI BYPASS GPIO RS-232C HD-SDI IN HD-SDI BYPASS 14 15 Name Specifi cation DVI 2 input 24P DVI-D DVI 1 input 24P DVI-D VGA input... -
Page 24: Settings
Input Output Confi guration IPS500A D VI 2 IN D VI 1 IN A IN M PO SI TE D VI S- VI D EO B/ R G BS /Y Pb G PI Output: D VI R S- 23 2C -S D -S D I IN... - Page 25 On Screen Display (OSD) IPS500A Submenus under the ADJUST menu (variable by signal type) 1. BRIGHTNESS Increases or decreases the brightness. (Range : 0~100) 2. CONTRAST Increases or decreases the contrast. (Range : 0~100) 3. SHARPNESS Sets the sharpness of image. (Range : 0~100) 4.
- Page 26 Windowing Features IPS500A The Universal Converter off ers several options for displaying picture-in-picture (PIP) or picture- by-picture (PBP) layouts on a destination source. There are 4 basic layout to choose from. PIP (smaller inset screen - 25%) PIP (larger inset screen - 33%) PBP1 (side-by-side screens) PBP2 (side-by-side screens, full screen) There are 9 picture-in-picture positions available.
-
Page 27: Video Resolution Timing
Input / Output Timing IPS500A VGA/ DVI (Fiber DVI) in / DVI loop through out Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) Clock Frequency (MHz) 640 x 350 @70Hz 31.469 70.087 25.175 640 x 350 @85Hz 37.860 85.080 31.500 640 x 400 @60Hz 31.469 59.941 25.175... - Page 28 Input / Output Timing IPS500A SDI in / SDI loop through out Resolution Resolution Resolution Resolution 480i@60 576i@50 720p@23 720p@24 720p@25 720p@50 720p@60 1080i@23 1080i@24 1080i@30 1080i@50 1080i@60 1080p@23 1080p@24 1080p@30 1080p@50 1080p@60 DVI out Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) Clock Frequency (MHz) 1280 x 1024 @60Hz 63.800...
-
Page 29: General Specifi Cation
Dimensions IPS500A 305 mm / 12 in. 9/2021... - Page 30 Specifi cation IPS500A Item Description Model IPS500A 1 x DVI-D 1 x DVI-D (Fiber DVI detachable) 2 x D-SUB(VGA, Component, RGBs) Input Signal 1x BNC (3G-SDI) 1 x BNC (CVBS) 1 x DIN (SVHS) 1 x DVI-D Output Signal 1 x BNC (3G-SDI) Power Supply AC/DC Adaptor (AC 100~240V, DC 12V 7A) Power Consumption...
-
Page 31: Cleaning Instructions
Cleaning Instructions Follow your hospital protocol for the handling of blood and body fl uids. Clean the device with a diluted mixture of mild detergent and water. Use a soft cotton towel or swab. Use of certain detergents may cause degradation to the labels and plastic components of the product. Consult cleanser manufacturer to see if agent is compatible. - Page 32 Thank you for choosing our product. Service Contact the appropriate customer service listed below for product information or assistance. Warranty One year, parts and labor. EC Representative KTR Europe GmbH Mergenthalerallee 77, Eschborn 65760, Germany Tel : +49(0)6196-887170 FORESEESON GmbH Industriestrasse 38a, 63150 Heusenstamm, Germany Tel.
Need help?
Do you have a question about the IPS100A and is the answer not in the manual?
Questions and answers