Advertisement
D. INSTRUCTIONS
1
1
L
L
E
E
D
D
L
3
3
E
E
5
5
J
J
M
M
1. Put the tyres (L) on the wheels (D) and (E).
2. Turn the car body (A) over and slot in the front wheels.
3. Turn the car body the right way up again. Slot the rear wheels into the body.
4. Insert the cam with gear (I) and the slider (C) into the body, making sure that the pin on the cam fits into the slider.
5. Insert the gear (M) into the body, making sure that the teeth interlock with the gear on the rear wheels. Also add the clutch (J), making
sure its teeth interlock with the gear and the cam with gear.
6. Insert the motor (G) into its housing in the body.
2
2
L
4
4
6
6
G
G
7
7
D
A
A
I
I
9
9
C
C
11
11
7. Add the motor cover (B) and secure it with four screws (N).
8. Insert the ends of the two red wires into one of the terminals and secure them with a terminal cap (O). Repeat with the two black wires
in the other terminal.
9. Insert the two batteries (the flat ends of the batteries must be against the springs), then add the battery cover (H) and secure it with a
screw. Adult supervision is required.
10. Add one sticker to each domino.
11. Slide a few dominoes into the front of the loading area.
12. Slide a few dominoes into the rear of the loading area.
8
8
N
N
B
B
10
10
H
H
12
12
O
O
K
K
F
F
Advertisement
