Haier HWF10AN1 User Manual page 9

NE AU
The recommendation on the type of detergents is suitable for the various washing temperatures,
please refer to the manual of detergent (see P11).
3.5 Function buttons
T e h f n u t c o i n
in the selected programme before programme starts.
The related indicators are displayed.
all options are disabled.
If a button has multiple options, the desired option can
be selected by pressing the button sequentially.
By touching the buttons, when it is in dull light, the function
is unselected; when it is in bright light, the function is
selected.
Note: Factory settings
there is no special requirement default settings are recommended.
o set up level of Detergent:
3.5.1-Function button " Auto Dose"
Touch this button (Fig. 3-7) gently to select the auto dose function for
liquid detergent, panel display . If the liquid detergent is not enough to
complete the cycle,
To set up level of detergent:
The Auto Dose function dispenses the right amount of detergent for the clothes
according to the weigh and load type. The default setting is "D-3", which is the average
amount of detergent needed to launder a medium soiled load. There are 3 additional
levels that allow to change the way the washer calculates the volume of liquid detergent;
this enables a personalized experience according to the laundry needs. For lightly soiled
clothes, use level "D-1" or level "D-2" and for heavily soiled clothes we recommend setting
the washer to level "D-4". Similarly, for sensitive skin, we recommend using the lower
setting "D-1", to minimize possible residual detergent in the clothes.
To change the Auto Dose setting: Press the "Auto Dose" button for 3s to enter the
program setting mode. The program indicator light will turn ON and the default position
"D-3" will be displayed. Rotate the knob to switch between levels and select the desired
setting. Press the "Auto Dose" button again to save the selection and exit the mode.
Note: Liquid detergent
If using liquid detergent, it is not recommended to adding more than 750ml.
3.5.2 Function button "+ Garment"
a garment at any time during the wash part of the cycle (provided the wash
temperature selected is lower than 60°C). Water in the washer will be drained
to a level where the door can be opened, if necessary.
3.5.3 Function button "Soak"
Touch this button (Fig. 3-9) to add deep cleaning soak for your mixed daily
loads in a normal wash action.
b t u o t s n i F ( . g - 3 ) 6 n e
will flash every second.
（Fig.3-8） can be used to interrupt the cycle to add or remove
b a e l d a t i d o i a n o l ptions
ogramme,
3.5.1
3.5.2
3.5.6
3.5.7
Auto Dose
+ Garment
3-6
3.5.3
3.5.5 3.5.4
3-7
3-8
3-9
Soak
9