Advertisement
Quick Links
54"1 DRAWER WORKBENCH
CT5401B
678-585-4431
XDDPRODUCTS.COM
CAUTION:
Read and follow all Safety Rules and Operating instructions before first use of this product
Notice: Picture shown is for illustration purpose only and may differ from the actual product.
NOTE: If any parts are missing or damaged, or if you have any questions, please send an email
to
customerservice@xddproducts.com
or call 678-585-4431.
Advertisement
Summary of Contents for Frontier CT5401B
- Page 1 54”1 DRAWER WORKBENCH CT5401B 678-585-4431 XDDPRODUCTS.COM CAUTION: Read and follow all Safety Rules and Operating instructions before first use of this product Notice: Picture shown is for illustration purpose only and may differ from the actual product. NOTE: If any parts are missing or damaged, or if you have any questions, please send an email customerservice@xddproducts.com...
-
Page 2: Warranty
WARRANTY The manufacturer warrants the product to be free from defects in materials and workmanship for a period of one (1) year from date of purchase. This warranty applies only to the original consumer and only to products used in normal use and service. If this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alteration neglect or... -
Page 3: Key Parts Diagram
KEY PARTS DIAGRAM ITEM ITEM M6x16mm screw Shelf M6x10mm screw Galvanized worktop M4x10mm screw Inner plate(D1) with ball bearing slide(D2) M5x15mm Self tapping screw Front and back rail M6Nut M4x50mm S elftappingscrew Drawer Pegboard supporter 6x25x1.0mmWasher Pegboard Connect bracket Top tray NOTE: If any parts are missing or damaged, or if you have any questions, please send an email customerservice@xddproducts.com or call 678-585-4431. - Page 4 ASSEMBLY ATTENTION: Do not tighten the screw until the installation is complete. Step1 Remove the protective film, using18pcsM6x16mm screws (AA) to install the bottom shelf (B) with three legs (A). Number Name Shelf M6 x 16mm screw Quantity Step2 Remove the protective film, install the second shelf (B) and fix the fourth leg (A) using 30pcs M6 x 16mm screws (AA).
- Page 5 ASSEMBLY Step3 Install the front and back rail (E) with 16pcs M6x16mm screws (AA). Note: The holes on the rails should face upwards. These rails are used to assemble the galvanized work top. Correct Wrong Number Name Front and back rail M6 x 16mm screw Quantity Step4...
- Page 6 ASSEMBLY Step5 Install the ball bearing slide (D2) on the inner plate (D1), then install the inner plate with ball bearing slide (D) on all legs, using 8 pcs M4 x 10mm (CC) screws. Attention Back Front Number Name Inner plate Ball bearing slide M4 x 10mm screw...
- Page 7 ASSEMBLY Step7 Install the Pegboard (H) on the pegboard supporter (G) and galvanized work top(C) , using 6pcs M6x16mmscrews (AA) and 2pcs M5 x 15mm elftappingscrews (DD) respectively. Number Name Pegboard M6 x 16mm screw M5 x 15mm Self tapping screw Quantity Step8 Install the...
- Page 8 ASSEMBLY Step9 Install the t op ray (J) on the pegboard supporter (G) and Pegboard (H), using 8pcs M6x10mm screws (BB), 2pcs M6 x 16mm screws (AA) and 10pcs M6 nuts (EE) respectively. Number Name Top tray M6 x 16mm screw M6 x 10mm screw M6 Nut Quantity...
- Page 9 678-585-4431 XDDPRODUCTS.COM Retain this manual for future use...