Download Print this page
Frontier XTB4201A Owner's Manual

Frontier XTB4201A Owner's Manual

Top chest 1 drawers

Advertisement

Quick Links

TO REMOVE THE SLIDE
from the unit,firstly
remove the drawer(follow the drawer removal
procedure).Lift the front of the slide set using a
screwdreiver to release the hooks.
step 1
Put 4 long inserting pieces(14/A) to the drawer
then fix 5 smaller inserting pieces(15/B) to
correct position as picture showing
A
A
B
B
B
A
B
A
B
MAINTENANCE
Automobile waxes will protect and preserve the finish of your storage cabinet or chest.
Using the standard application instructions,apply wax regularly to your cabinet or chest to
protect against scratching.
Use a soft, clean cloth and standard cleaning solutions to remove grease, dirt or oil.
Do not use solvents or flammable cleaning liquids.
Lubricate slides with petroleum jelly twice yearly.
Lubricate castors with high quality grease annually.
Use graphite to lubricate lock annually.
Drawer fronts,trim and other surfaces may be caleaned with a mild detergent and water.
3
TO REINSTALL THE SLIDE,
place the slide
in the appropriate position,pull the silde and
engage Tab "B"into Slot"B" Tab"A"into Slot"A".
Tab B
Tab A
Slot B
Slot A
Rev.20130401
Owner's Manual
Top chest: XTB4201A(1 Drawers)
CAUTION:
Read and follow all Safety Rules and Operating instructions before first use of this product
Notice: If there are any difference between the product and picture, pls take the product as real.

Advertisement

loading

Summary of Contents for Frontier XTB4201A

  • Page 1 TO REINSTALL THE SLIDE, place the slide in the appropriate position,pull the silde and Owner's Manual engage Tab "B"into Slot"B” Tab"A"into Slot"A". Top chest: XTB4201A(1 Drawers) Tab B step 1 Tab A Put 4 long inserting pieces(14/A) to the drawer then fix 5 smaller inserting pieces(15/B) to...
  • Page 2 Fill in the following information and save this manual for future reference ASSEMBLY Model # ..........Place of purchase ........ OPERATION Date of purchase ......... REMOVING AND INSTALLING DRAWERS: Empty the drawer. Fully extend drawer. SAFETY Left side:Push the locking tab down and hold. Rlght side:Pull the locking tab up and hold.
  • Page 3 Parts List part Description Plastic handle Shelf Long pieces Short pieces Gas stract Power strip Handle Drawer 22lbs 37.4lbs 37.4lbs load 132lbs 100lbs...