Advertisement
Dolphin M400 / M500
User Instruction
1. INTRODUCTION
Thank you for purchasing a Maytronics Robotic Pool Cleaner.
We are sure that your Maytronics Robotic Pool Cleaner will provide you with reliable, convenient and
cost effective pool cleaning. Its reliable filtration in all pool conditions, active brushing, and all-surface
climbing brush enhance maximum pool hygiene.
The Robotic Pool Cleaners by Maytronics deliver advanced cleaning technology, long lasting
performance and easy maintenance. You and your family will be free to enjoy swimming with full
confidence that your pool is completely clean.
2. SPECIFICATIONS
Motor protection: IP 68
Minimum depth: 0.80m/2.6ft
Maximum depth: 5m/16.4ft
3. WARNINGS AND CAUTIONS
3.1 Warnings
• Use the originally supplied power supply only
• Ensure the electrical outlet is protected by a ground fault interrupter (GFI) or an earth
leakage interrupter (ELI)
• Keep the power supply out of standing water
CAUTION
• Position the power supply at least 3.5m/12ft away from the edge of the pool
• Do not enter the pool while the Pool Cleaner is working
• Unplug the power supply before servicing
3.2 Cautions
When not in use store the Pool Cleaner on its Caddy in a shaded area.
Use the Pool Cleaner in the following water conditions only:
Chlorine
Max 4 ppm
pH
7.0 - 7.8
Temperature
6-34°C / 43-93°F
NaCl
Maximum = 5000 ppm
2
Digital switch-mode power supply
•
Input - 100-250 AC VOLTS
•
50-60 Hertz
•
180 Watt
•
Output - <30 VDC
•
IP 54
Dolphin M400 / M500
|
User Instructions
Advertisement
Table of Contents
Related Manuals for Dolphin M400
Summary of Contents for Dolphin M400
- Page 1 Dolphin M400 / M500 User Instruction 1. INTRODUCTION Thank you for purchasing a Maytronics Robotic Pool Cleaner. We are sure that your Maytronics Robotic Pool Cleaner will provide you with reliable, convenient and cost effective pool cleaning. Its reliable filtration in all pool conditions, active brushing, and all-surface climbing brush enhance maximum pool hygiene.
- Page 2 4. POOL CLEANER PARTS Dolphin M400 / M500 Remote Control Unit - M500 only Brushes Combined Brush Wonder Brush All surface climbing brush, For smooth ceramics. ideal for most pool surfaces. Filtration Cartridge with Net filters (X4) Ultra-fine filter (X4)
- Page 3 To adjust the handle angle: A. Press the latch down and hold it in position. B. Move the handle to the desired position and release the latch to hold the handle in place. Dolphin M400 / M500 User Instructions...
Need help?
Do you have a question about the M400 and is the answer not in the manual?
Questions and answers