Battery Care; Battery Disposal - Dremel 7350 Operating/Safety Instructions Manual

1605A000DGAB 02-21 7350_7300-PGT 6/2/21 9:21 AM Page 14
Unplug tool from power adapter when battery in tool is fully
charged. Tool left plugged in the power adapter over a long
period of time could lead to tool damage and fire.
Unplug power adapter from outlet before storage, attempt-
ing any maintenance or cleaning. Such preventive safety mea-
sures reduce the risk of electric shock or fire.
Keep the power adapter clean by wiping it with a damp cloth.
Contamination may result in electric shock or fire.
Replace battery pack if a substantial drop in operating time
per charge is observed. Battery pack may be nearing the end
of its life.

Battery Care

protect terminals from shorting DO NOT place batteries in a
tool box or pocket with nails, screws, keys, etc. Fire or injury
may result.
DO NOT PUT BATTERIES INTO FIRE OR EXPOSE TO HIGH
HEAT. They may explode.
Battery leakage may occur under extreme usage or tempera-
ture conditions. Avoid contact with skin and eyes. The bat-
tery liquid is caustic and could cause chemical burn to tissues.
If liquid comes in contact with skin, wash quickly with soap
and water. If the liquid contacts your eyes, flush them with
water for a minimum of 10 minutes and seek medical attention.

Battery Disposal

the tool. Fire or injury may result. Prior to disposal, protect
exposed terminals with heavy insulating tape to prevent short-
ing.
LITHIUM-ION BATTERIES
If equipped with a lithium-ion battery, the battery must be col-
lected, recycled or disposed of in an environ mentally sound
manner.
14
When batteries are not in tool, keep them
away from metal objects. For example, to
Do not attempt to disassemble the tool or
remove any component projecting from