Table of Contents
Advertisement
2 | Deutsch
3 | English
Safety precautions
Use of the battery
• Do not charge damaged, dirty or wet batteries.
• Batteries must not be thrown into water or fire at any time, used batteries must not be
disposed of as you please
• Do not charge when the ambient temperature is below 0°C or above 45°C.
Use of the charger
• The original battery and the manufacturer's charger must be used for charging.
• Do not charge the battery with a damaged, dirty or damp charger.
• Do not place metal objects in the charging area as a short circuit may occur.
• This charger must not be used by persons with disabilities, mental disabilities or
persons without training or knowledge unless a safety officer is on site to supervise
or instruct them in its use.
Danger
• The lockbolt setting tool must not be used in a damp environment or in the vicinity of
flammable liquids and gases. Danger of explosion!
• Do not point the lockbolt setting tool at yourself, others or animals.
• Do not load in a damp environment, near an open fire or in an environment with flam-
mable, highly combustible gases that can easily be detonated.
Warning
• Tools should be placed so that they do not fall down to avoid unnecessary damage
and safety accidents.
• When installing the battery, be sure to fix its position. After you hear a "click" sound the
battery is properly placed.
• When servicing this lockbolt settersetting tool, make sure that the charger and its
power supply equipment are in good condition.
• Use a power supply unit that matches the charger.
• Plugs, power cords and chargers should be checked regularly. If a problem is found, it
should be repaired by the maintenance personnel.
• Maintenance personnel must have professional skills; only qualified professionals
can carry out repairs. If in doubt, please return the tool to the authorised dealer or
manufacturer for repair.
• Original spare parts must be used during maintenance.
www.goebel-group.com
Advertisement
Table of Contents
