1. Manuals
  2. Brands
  3. Fire Mountain Manuals
  4. Outdoor Fireplace
  5. JH06112003
  6. Instructions manual

Fire Mountain JH06112003 Instructions Manual

Rectangular gas fire pit
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Rectangular Gas Fire Pit
PLEASE READ AND KEEP THESE INSTRUCTIONS FOR FUTURE USE
SAP Code: JH06112003
For further assistance, other products and more,
join us at:
Website: www.firemountain.co.uk
Facebook: www.facebook.com/fire-mountain
Thank you for choosing our Fire Mountain Rectangular Gas Fire Pit.
Please read this user manual carefully and keep it for future
reference. If you need any assistance, please contact our customer
service team on the details provided on the back page of this manual.
IMPORTANT: Read all instructions and operations before operating this unit.
WARNING:
Do not modify the appliance.
Do not move the appliance during use.
Turn off the gas supply at the gas cylinder after use.
Accessible parts may be very hot. Keep young children away.
The appliance should not be used in basements or below ground level.
The appliance must only be used for space heating.
WARNING:
THIS APPLIANCE HAS A NAKED FLAME; A SUITABLE GUARD SHOULD BE
USED FOR THE PROTECTION OF YOUNG CHILDREN, THE ELDERLY AND
THE INFIRM.
After connecting the gas regulator to the gas cylinder, please ensure that the
hose is straight (see diagram 1) and not coiled or touching the underside of
the fire bowl (see diagram 2). Otherwise the hose may melt and cause a fire.
Diagram 1
Diagram 2
2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JH06112003 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Fire Mountain JH06112003

Summary of Contents for Fire Mountain JH06112003

  • Page 1 Thank you for choosing our Fire Mountain Rectangular Gas Fire Pit. Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our customer service team on the details provided on the back page of this manual.

  • Page 2: Specification

    ATTENTION: This appliance is fitted with a flexible gas rubber pipe and Specification clamps that must be used; never use different kind and always according to the National Rules in force of the country of destination. These components should be periodically changed, according to the date reported on the body of each of them, or according to the National Rules in force of the country of destination.
  • Page 3 3. Do not try lighting any appliance. Do NOT store any combustible materials in the base enclosure 4. Do not touch any electrical switch nor use any nearby phone.  The use of alcohol, prescription or non-prescription drugs may impair an individual’s ability to properly assemble or safely operate 5.
  • Page 4 such a concrete, rock or stone. Always shut off gas supply at the tank valve and disconnect regulator from the tank when the fire pit is not in use. An asphalt or blacktop surface may not be acceptable for this purpose. Do NOT sit on the mantle when the unit is in operation.
  • Page 5 Never keep a filled LP gas tank in a hot car or car trunk. Heat will cause the Liquid Propane Gas (LPG) Warnings gas pressure to increase, which may open the relief valve and allow gas to LP gas is flammable and hazardous if handled improperly. Please review escape.
  • Page 6 than 60 ˚C. When substitution will be necessary, you have to purchase suitable gas regulator, flexible gas rubber pipe and clamps from your local gas dealer; regulator should be substituted not over 10 years. Flexible gas rubber pipe must be carefully, avoiding any twisting. Never use a damaged gas regulator.

  • Page 7: Assembly Notes

    Assembly Notes 2. 2.Attach the Panel (F) to the Left Front Leg (M) and Right Front Leg (O)  Assemble on a soft, clean surface to avoid damaging or marking the using 4 pcs Screws(a) and 4 pcs Spacers (c). Attach the Panel (H) to the Left pieces Back Leg (L) and Right Back Leg (N) using 4 pcs Screws (a) and 4 pcs Spac- ...
  • Page 8 8. Put the Table lid (B) vertically on the Fire Table with Burner (E) 5. Insert Door (I) into the hole on the Tank Holder (J). 6. Attach the Rail (K) to the Door (I), attach it to the Left Back Leg (L) and Left 9.
  • Page 9 11. Locate the battery pack and remove the cover and place an AA Battery in After connecting the gas regulator to the gas cylinder, please ensure that the the unit. Screw the cap back on to the battery case tightly. hose is straight (see diagram 1) and not coiled or touching the underside of the fire bowl (see diagram 2).

  • Page 10: Leakage Testing

    If ignition doesn't occur within a few seconds, release the control Soap bubbles will begin to form in the soapy solution if any leakage is knob (M) and rotate to the “OFF" position. Wait for 5 minutes for gas present. to clear and then repeat the above lighting instructions.
  • Page 11 Attention: Never use unauthorized parts or component for this While washing your unit makes sure to keep the area around the burner appliance. Use only original equipment replacement spare parts and assembly dry at all times. If the gas control is exposed to water in any components.

  • Page 12: Troubleshooting

    Customer Services: If you would like further advice or information on your product, ensure you have the SAP code ready and please get in touch with us at Fire Mountain on the contact options below: JH06112003 SAP Code: Phone: 0330 002 1600 (Mon –...

Table of Contents