Safety Features - wiwa 14025 R/F Operation Manual

2.4 Safety features

Original operation manual 2K GEL UNIT
2KGel_14025_25015_BAoDB_en_1701 • rs
WARNING
If safety feature is missing or is not fully functional, the operating safety of
the machine is not guaranteed!
Put the machine out of operation immediately if you detect safety feature
➤
defects or any other faults on the machine.
Only put the machine back into operation once the faults have been fully
➤
rectified.
The machine is equipped with the following safety features:
Safety valve on proportioning pump and flush pump
➤
Compressed air shut-off valve
➤
Ground cable
➤
Check the safety features on the machine:
Prior to commissioning,
➤
Always prior to starting work,
➤
After all set-up work,
➤
After all cleaning, maintenance, and repair work.
➤
Checklist on the pressureless machine:
Seal on the safety valve OK?
5
Safety valve externally free of damage?
5
Function of the compressed air shut-off valve OK?
5
Function of the ball valves and the one-hand lever on the mixer block OK?
5
Ground cable free of damage?
5
Is the ground cable connected to the machine and OK at the circuit board?
5
Checklist on the pressurized machine:
Function of the safety valve(s) OK?
5
When checking additional safety features, observe the operation manuals for
the optional accessories.
Safety
11