Table of Contents
Advertisement
Print transmission
Approximately 16 seconds for
time
transmission and to start printing
* Plus 7 seconds when printed using
INSTAX-Rich Mode immediately after
startup.
Print function
Images in the internal memory or on a
memory card (sold separately) can be
printed
Reprint
Reprint is possible for images stored in
print history (up to 50)
■ Other
Smartphone App
Smartphone image print function,
Functions
remote shooting function, printed image
transfer function, firmware upgrade
function
LCD Screen
3.0-inch TFT color LCD screen
Pixel count: Approximately 460,000 dots
External interface
Micro USB Micro-B (for charging only)
Power supply
Lithium ion battery (internal type: not
removable)
Charging function
Built-in
Possible number of
Approximately 100 (from full charge;
printed images
number of prints depends on usage
conditions)
Charging time
2-3 hours (depending upon environment
temperature at time of charging)
Main unit
3.4 in x 4.8 in x 1.4 in / 87 mm x 122.9 mm
dimensions
x 36 mm (excluding projecting parts)
Main unit weight
Approximately 0.63 lbs (285 g)
Operating
Temperature: 41 ºF to 104 ºF (5 ºC to 40 ºC)
environment
Humidity: 20% to 80% (no condensation)
Film used
FUJIFILM INSTAX MINI instant print film
(sold separately)
* The above specifications are subject to change for performance
improvement.
Troubleshooting
Please check the following items before considering a problem
to be a malfunction. If the problem persists even after taking
action, please contact the FUJIFILM service center for repair in your
country or visit the website below.
FUJIFILM website: https://www.fujifilm.com/
If the following problem occurs���
Problem
Possible causes and solutions
I cannot turn on
The battery may not be charged. Please
the camera.
charge the camera.
The battery
If you use the camera in a very cold
loses its charge
environment, the battery will drain quickly.
quickly.
Please keep the camera warm before
shooting.
The camera
The battery level may be low. Please charge
turned off
the camera.
during use.
Charging does
• Make sure that the USB power adapter
not start.
plug is properly connected to the power
outlet.
• Turn off the camera when charging. If
power is on camera will not charge.
It takes too long
At low temperatures, charging may take
to charge.
some time.
The self-timer
Charge the battery in a temperature range of
lamp flashes
41 ºF to 104 ºF (5 °C to 40 °C).
while charging.
I am unable to
• Make sure that the power is on.
shoot when I
• If the battery level is low, please charge
press the shutter
the camera.
button.
• If the internal memory or memory card is
full, insert a new memory card or delete
unnecessary images.
• Use a memory card formatted with this
unit.
• If the contact surface of the memory card
(gold part) is dirty, wipe it with a soft, dry
cloth.
• The memory card may be broken. Please
insert a new memory card.
I am unable
Use the AF/AE Lock to shoot subjects that
to focus the
are difficult to focus on.
camera.
The flash does
Check to see if Suppressed Flash is selected
not fire.
in the Flash settings. If so, select a setting
other than Suppressed Flash.
Even though the
• Check to see if you are far from the
flash fired, the
subject. Shoot within the range where
image is dark.
flash photography is possible.
• Hold the camera correctly so that you do
not obstruct the flash with your fingers.
NA_EN
25
Advertisement
Table of Contents
